iDect Eclipse Plus User Manual page 70

Single/twin/triple/quad
Hide thumbs Also See for Eclipse Plus:
Table of Contents

Advertisement

"When I press on the keys, nothing happens"
"When I press on the keys, nothing happens"
"When I press on the keys, nothing happens"
"When I press on the keys, nothing happens"
Make sure that the batteries are fitted in your handset. If the
Battery Level symbol on the display shows 'low', put your handset
back on the base unit or charging pod to charge.
"When I key in a number, it appears on the display, but I cannot make an
"When I key in a number, it appears on the display, but I cannot make an
"When I key in a number, it appears on the display, but I cannot make an
"When I key in a number, it appears on the display, but I cannot make an
external call"
external
call"
external
external
call"
call"
Try a different position for the base unit – somewhere higher if
possible, or further away from other electrical equipment.
"The phone does not ring"
"The phone does not ring"
"The phone does not ring"
"The phone does not ring"
Check that the base unit's mains power adapter is plugged in and
power is switched on.
The base unit needs mains power for normal operation of the
phone – not just for charging the batteries.
Make sure that you are using the telephone line cable that was
supplied with your phone.
Make sure that the ringer volume settings are not set to off.
Increase the ringer volume settings.
page 55.)
"My call was cut off when I went out of range. Now I can't use my
"My call was cut off when I went out of range. Now I can't use my
"My call was cut off when I went out of range. Now I can't use my
"My call was cut off when I went out of range. Now I can't use my
handset."
handset."
handset."
handset."
Move the handset closer to the base unit before you try to make a
call again.
"There is interference and noise on the line"
"There is interference and noise on the line"
"There is interference and noise on the line"
"There is interference and noise on the line"
Move the handset closer to the base unit, or to a different position.
Try moving the base unit away from other electrical equipment,
such as a television or a computer.
You'll get the best reception if you place the base unit as high as
possible. For example, in a two-floor building, the first-floor landing
is an ideal place.
"I hear 'beeps' from my handset while I'm on a call"
"I hear 'beeps' from my handset while I'm on a call"
"I hear 'beeps' from my handset while I'm on a call"
"I hear 'beeps' from my handset while I'm on a call"
You may be moving out of range of the base unit. Move closer or
your call may be cut off.
Check the Battery Level symbol on the display. If it's low, recharge
the batteries.
(See Set the
Set the R R R R ing
Set the
Set the
68
ing V V V V olume
olume on
ing
ing
olume
olume

Advertisement

Table of Contents
loading

Table of Contents