Change The Recall Time - iDect Eclipse Plus User Manual

10.6 Change 10.6 Change the the R R R R ecall
10.6 10.6 Change Change the the
You may need to press
handsets) to send a Flash signal (also called Recall or Timed Break Recall)
if you are connected to a PBX or using certain network services. You
should normally leave the Recall Time at its default setting, Short
(100ms), as this is the standard recall required in the UK telephone (100ms)
(100ms) (100ms)
network. However, it can be changed to Medium (270ms) or Long
(600ms) if your telephone is connected to a PBX that requires a different
recall time.
- On Your On Your Main
On Your On Your
1. From the home screen, press
+
2. Press
+
3. Press
+
4. Press
M
press
A confirmation tone is played.
•
O
5. Press
- On Your Additional Handset On Your Additional Handset
On Your Additional Handset On Your Additional Handset
1. From the home screen, press
+
2. Press
3. Press +
handsets) to select.
+
4. Press
M
press
A confirmation tone is played.
•
O
5. Press
ecall T T T T ime ime
ecall ecall ime ime
T
(main Eclipse handset) or
Main Eclipse Handse Eclipse Handset t t t
Main Main Eclipse Handse Eclipse Handse
-
/ to SETTINGS SETTINGS and then press
SETTINGS SETTINGS
-
/ to RECALL TIME RECALL TIME and then press
RECALL TIME RECALL TIME
-
/ to select SHORT
to confirm.
to return to standby mode.
-
\ to ADVANCED SET ADVANCED SET and then press
ADVANCED SET ADVANCED SET
\ - to RECALL TIME RECALL TIME and then press
RECALL TIME RECALL TIME
-
\ to select SHORT
to confirm.
to return to standby mode.
M
.
SHORT, MEDIUM MEDIUM or LONG
SHORT SHORT MEDIUM MEDIUM
M
.
SHORT, MEDIUM MEDIUM or LONG
SHORT SHORT MEDIUM MEDIUM
65
F
(additional
Short Short Short
M
to select.
M
to select.
LONG and then
LONG LONG
M
to select.
M
(additional
LONG and then
LONG LONG