Number Of Rings; Replacing The Batteries; Pairing Gap-Compatible Dect Handsets On The Sixty Base - SAGEMCOM SIXTY User Manual

• Press Valid..
• CODE DISTANCE is displayed, enter the new remote
access code (4 digits mandatory).
• Press Valid.. OK is displayed on the screen.
• Press Return to go back to the previous menu.
N
UMBER OF RINGS
This parameter determines the number of times your
phone rings before your answering machine is started.
The number of rings is between 3 and 7.
• Go to ANS. MACH / SETTINGS
• Press Valid..
• The programmed number of rings is displayed on the
screen. Press keys
(from 3 to 7).
• Press Valid.. OK is displayed on the screen.
• Press Return to go back to the previous menu.

REPLACING THE BATTERIES

• Remove the battery compartment hatch.
• Remove the old batteries, insert the new batteries one
by one in compliance with the polarity of the batteries,
as indicated in paragraph "Your handset", page 6.
• Refit the battery compartment hatch.
• Leave your handset on its base in order to fully charge
the batteries.
/ NO OF RINGS.
or to change this number
PAIRING GAP-COMPATIBLE
DECT HANDSETS ON THE
SIXTY BASE
Additional GAP-compatible DECT handsets can be
registered on the SIXTY base.
To register an additional handset on the SIXTY base:
• Set your base to pairing mode by holding down
the key. The light indicator on the top of the '1'
key starts flashing. The base remains in pairing mode
for one minute.
• Set the additional handset to registration mode. (Refer
to the your handset's user manual).
Up to five
handsets can be registered on the SIXTY
base.
GAP-compatible DECT
29