Modifying The Base Code - SAGEMCOM SIXTY User Manual

Setting a PABX prefix
If a private automatic branch exchange is used, you can
programme the external call prefix.
With this function you can set the:
- PABX prefix number,
- dialled number length at which point the PABX
prefix will be automatically inserted (this length is
called "digit before prefix"),
- prefix status (on or off).
• Go to SETTINGS / ADVANCED SET.
PABX PREFIX.
• Press Valid..
• Press or to modify this setting.
• Select the desired option:
- ACTIVATE / DEACTIVATE
- PREFIX : to enter the number giving you access to
the outside line.
- EDIT LENGTH : to specify the «digits before
prefix».
• To modify the prefix, select
• Enter the prefix using the keypad, press Valid..
OK is displayed on the screen.
• To modify the digits before prefix, select
LENGTH, press Valid..
• Enter the digits before prefix using the keypad.
• Press Valid.. OK is displayed on the screen.
• Now you can activate the automatic PABX prefix
functionality, select ACTIVATE and press Yes.
• Press Return to go back to the previous menu.
/ SET LINE /
: to select a status.
PREFIX press Valid..
EDIT

Modifying the base code

This code secures and limits the use of your telephone.
• Go to SETTINGS / ADVANCED SET.
CODE.
• Press Valid..
• Enter the old base code using the keypad (default is
0000).
• Press Valid..
• Enter the new base code using the keypad.
• Press Valid..
• Confirm by entering the new base code again.
• Press Valid.. OK is displayed on the screen.
• Press Return to go back to the previous menu.
/ CHANGE
25