Advanced Settings; Base Settings - SAGEMCOM SIXTY User Manual

• Press the key during this animation,
MELODY" is displayed, and the melody for external
calls is initiated.
• Press Exit to stop the demonstration.
A
DVANCED SETTINGS

Base settings

Set the base to registration mode
Using this function you can add GAP compatible
hnadsets to your base. The handset that you want to pair
with your base must itself be in pair mode.
Consult the user booklet of your handset to find out what
to do.
You can save up to 5 GAP-compatible
handsets on your SIXTY base.
• Go to SETTINGS / ADVANCED SET.
REGISTR. MODE.
• Press Valid..
• REGISTR. MODE? is displayed on the screen, press
Yes.
• Indicator on the the top of the '1' key starts to flash
rapidly. Your base will remain in registration mode for
about 1 minute.
"DEMO
Resetting the base
When you reset your base, all the base parameters are
reset to their initial values (factory settings).
• Go to
RESET
• Press Valid..
• REINIT. BASE? is displayed on the screen.
• Press Yes.
• Enter the base code.
• Press Valid..
The "RE-INIT. IN PROCESS" and the OK messages
are displayed successively.
/ SET BASE /
Your base is now reset.
De-registering a handset
• Go to
DELETE
• Press Valid..
• Select the handset you wish to unregister using
or .
• Press Valid..
• A screen prompts you to confirm the unregistration.
You can also set the base to pairing mode
by holding down your base's
SETTINGS / ADVANCED SET.
BASE.
SETTINGS / ADVANCED SET.
HANDSET.
key.
/ SET BASE /
/ SET BASE /
23