Server Certificate Selection - Motorola MK4000 MicroKiosk Product Reference Manual

B - 16 MK4000 MicroKiosk for CE .NET 5.0 Product Reference Guide

Server Certificate Selection

If you select the
Validate Server Certificate
Installed Server Certificates
certificate list. If the required certificate is not listed, install it:
Tap the
1. Install Certificate
Installed Server Certificates Dialog Box
Figure B-10
The
Import Certificate
A dialog box appears that lists the certificate files found with the default extension. Browse to the file and
2.
tap .
OK
A confirmation dialog verifies the installation. If the information in this dialog is correct, tap the
3.
the information in this dialog is not correct, tap the
dialog box. Select the newly-installed certificate from the drop down list.
Certs
User Name
You can enter the user name and password when you create the profile, but is not required. If you do not enter
the username and password in the profile, then when attempting to connect, you are prompted to supply them.
The entered information (credentials) is saved (cached) for future reconnections.
Whether or not you enter the username and password into the profile affects how the profile is treated during a
Profile Roaming operation. Profiles are excluded from consideration if they require user entry of credential
information.
If the profile uses an authentication tunnel type of EAP-GTC and you selected Token (see Password), then you
can control certain behavior by whether you enter a value in the
this field, when the Fusion software prompts you to enter credentials, the username field in the interactive
credential dialog is initialized with the value you entered when creating the profile. If you enter a different value
in the username field of the interactive credential dialog, it is cached and used to initialize the username field
the next time the interactive credential dialog is shown for that profile.
If you do not enter a value in the
username field in the interactive credential dialog is initialized to blank. After you enter a username in the
interactive credential dialog, it is cached as usual, but it is not used to initialize the username field the next time
the interactive credential dialog is shown for that profile; the username field is still initialized to blank.
In summary, you can control whether the username field in the interactive credential dialog box is initialized,
either with the last interactively-entered username for that profile or with the username entered into the profile,
by whether any value is entered in the
check box, a server certificate is required. Select a certificate on the
dialog box. An hour glass may appear as the wizard populates the existing
button.
dialog box appears. Choose Import from File (.cer, .pfx) and tap
field when you create an EAP-GTC token profile, the
Enter User Name
Enter User Name
button. The wizard returns to the
No
Enter User Name
field during profile entry.
.
OK
button. If
Yes
Installed Server
field. If you enter a value in