ActiveSync
The MK4000 communicates with a host computer using Microsoft
ActiveSync to transfer data between a host computer and the MK4000. The ActiveSync software on the MK4000
allows copying and pasting (rather than synchronizing) files between the MK4000 and host computer.
Installing ActiveSync
To install ActiveSync on the host computer, download the latest version of the software from
http://www.microsoft.com. Refer to the installation instructions included with the ActiveSync software.
Connecting the MK4000 to the Host Computer
To configure ActiveSync for Guest access (suitable for copying files between the host computer and the MK4000):
Connect the USB cable to the mini USB port on the MK4000 (see
1.
end of the cable to a USB port on the host computer.
If the
2.
New Partnership
.
ActiveSync
New Partnership Window
Figure 5-1
Click No and then Next. The
3.
Microsoft ActiveSync Guest Connected Window
Figure 5-2
window does not appear, on the host computer, select
Microsoft ActiveSync Guest Connected
Application Deployment
®
ActiveSync (version 4.5.1 or higher). Use USB
Figure 1-2 on page
1-3). Connect the other
Start > Programs > Microsoft
window displays.
5 - 5