Tunneled Authentication - Motorola MK4000 MicroKiosk Product Reference Manual

B - 12 MK4000 MicroKiosk for CE .NET 5.0 Product Reference Guide
Authentication Options (Continued)
Table B-8
Authentication
PEAP
LEAP
TTLS
Tap . Selecting
Next
displays the
None
Selecting displays the
LEAP

Tunneled Authentication

Use the
Tunneled Authentication
dialog differs depending on the
Tunneled Authentication Dialog Box
Figure B-8
To select a tunneled authentication type:
Select a tunneled authentication type from the drop-down list. See
1.
options for each authentication type.
Select the
2. User Certificate
requires a user certificate, the check box is already selected.
Tap . The
3. Next
Select this option to enable PEAP authentication. This type establishes a tunnel and, based
on the tunnel type, uses a user certificate and/or a username/password. Validating the server
certificate is optional.
Select this option to enable LEAP authentication. This type does not establish a tunnel.
It requires a username and password.
Select this option to enable TTLS authentication. This type establishes a tunnel and, based on
the tunnel type, uses a user certificate and/or a username/password. Validating the server
certificate is optional.
, or
PEAP, TTLS EAP-FAST
dialog box. Selecting
Encryption
dialog box.
User Name
dialog box to select the tunneled authentication options. The content of the
Authentication Type
check box if a certificate is required. If you selected the TLS tunnel type that
dialog box appears.
Installed User Certificates
Description
displays the
Tunneled Authentication Type
displays the
EAP-TLS
chosen.
Table B-9
dialog box. Selecting
dialog box.
Installed User Certs
for the Tunnel authentication