Kia Venga Owner's Manual page 198

Bluetooth
You can use a Bluetooth device in your
car to make a hands-free phone call or to
stream music onto your in-car speakers
(via this Head Unit). This Head Unit sup-
ports HFP, A2DP and AVRCP connec-
tion.
Advanced Audio Distribution Profile
(A2DP)
This profile defines how high quality
audio (stereo or mono) can be streamed
from one device to another over a
Bluetooth connection. For example:
music streamed from a mobile phone to
a wireless headset or car audio.
Audio/Video Remote Control Profile
(AVRCP)
This profile is designed to provide a stan-
dard interface to control TVs, Hi-fi equip-
ment, etc. to allow a single remote con-
trol (or other device) to control all of the
A/V equipment to which a user has
access. It may be used in concert with
Advanced Audio Distribution Profile.
Hands-Free Profile (HFP)
This is commonly used to allow car
handsfree kits to communicate with
mobile phones in the car.
Notes for mobile phones
Some functions (e.g. starting of speech
recognition) are not supported by all
mobile phones. We cannot guarantee
that all functions described will be sup-
ported by all mobile phones with
Bluetooth.
New device
This function allows you to add a new
phone to the Head Units Bluetooth
Device List. Maximum of 5 devices can
be added to the list. If the list is full, the
oldest device will be replaced by the
newly added Bluetooth device, based on
last pairing date.
Features of your vehicle
Pairing
To pair your Bluetooth-enabled device to
this Head Unit, make sure that no device
is currently streaming to this Head Unit
first.
Short press the SETUP button to
enter the Setup menu.
Short press the or
access the Bluetooth sub-menu.
Now select "New Device".
Press the or button to select
the number of the first digit.
Press the or button to select the
next digit.
Repeat the above steps for the other
three digits.
Press the OK button to confirm the 4-
digit PIN for authentication and acti-
vate the "Discoverable Mode".
In "Discoverable Mode" the Head Unit
broadcasts a Bluetooth ID.
Look for the "KIA-BLUETOOTH" on
your Bluetooth device.
Enter identically the same PIN in your
Bluetooth device and authenticate
pairing on your Bluetooth device.
When pairing is established, the ID of
the Bluetooth device and the service
list info will be stored in the Head Unit
Bluetooth Device List.
button to
4 121