Kia Venga Owner's Manual page 131

Hide thumbs Also See for Venga:
Table of Contents

Advertisement

Features of your vehicle
ESP OFF indicator
(if equipped)
The ESP OFF indicator will illuminate
when the ignition switch is turned ON,
but should go off after approximately 3
seconds. To switch to ESP OFF mode,
press the ESP OFF button. The ESP
OFF indicator will illuminate indicating
the ESP is deactivated.
✽ ✽ NOTICE
After reconnecting or recharging a dis-
charged battery, the ESP OFF indicator
may illuminate. In this case, turn the
steering wheel 360 degrees to the left
and 360 degrees to the right whilst the
ignition switch is in the ON position.
Then, restart the engine after the igni-
tion is off. If the ESP OFF indicator does
not turn off, have the system checked by
an authorised KIA dealer as soon as pos-
sible.
4
54
Cruise indicator (if equipped)
CRUISE indicator
The indicator illuminates when the cruise
control system is enabled.
The cruise indicator in the instrument
cluster is illuminated when the cruise
control ON-OFF button on the steering
wheel is pushed.
The indicator goes off when the cruise
control ON-OFF button is pushed again.
For more information about the use of
cruise control, refer to "Cruise control
system" in section 5.
Cruise SET indicator
The indicator illuminates when the cruise
control switch (SET- or RES+) is ON.
The cruise SET indicator in the instru-
ment cluster is illuminated when the
cruise control switch (SET- or RES+) is
pushed.
The cruise SET indicator does not illumi-
nate when the cruise control switch
(CANCEL) is pushed or the system is
disengaged.
Speed limit indicator (if equipped)
(1) Speed limit indicator
(2) Set speed limit indicator
The speed limit indicator illuminates
when the speed limit control system is
enabled.
The speed limit indicator in the instru-
ment cluster illuminates when the speed
limit ON-OFF button on the steering
wheel is pressed.
If the "
" indicator is shown in the
instrument cluster, it indicates no setting
of the speed limit.
The set speed limit will display when the
speed limit control switch (SET-/RES+) is
SET
ON.
If you drive over the speed limit, the set
speed limit will blink and chime will
sound.
The set speed limit turns off when the
speed limit is cancelled by pressing the
CANCEL button.
The speed limit indicator goes off when
the speed limit is deactivated.
For more information about the speed
limit control usage, refer to "Speed Limit
control System" in section 5.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents