Table of Contents
Advertisement
______________________________________________________________________
4.30.5 MASK A / B
MASKING AREA SETTING
MISC
H-REVERS
OFF
V-REVERS
OFF
POSI/NEGA
POSI
PRIORITY
AGC
→ON.
MASK A
MASK B
OFF
MASK A / B
→032
H-POSITION
V-POSITION
064
H-SIZE
048
V-SIZE
032
CONNECTED
OFF
4.31 Camera Address ID Setting
Push [ENTER] + [ESC] key 3 sec. to get into the OSD COMM menu.
COMM
→COMM ID
001
COMM MODE
1:1
5. Control Methods
5.1 PC Control
For window 95/98/2000
1.
Execute KB350SP_V.exe.
2.
A virtue keypad icon will display on screen.
3.
Use mouse to point the icons for on-screen-display setting.
4.
Another methode,user can use RS-485 protocol to command zoom camera.
** To control camera via PC, RS-485 converter will be required to convert RS-232C protocol
to RS-485 protocol.
5.2 Controller
The keyboard controller can control most of the camera functions. (reference circuit).
Screwless type
Terminal (REMOTE) Pin Assignment
Move cursor to MASK A/B, press ENTER key to enter MASK A/B menu.
Press UP or DOWN key to select ON/OFF.
Then press ENTER key to enter MASK A/B SETTING menu.
MISC MENU
Move cursor to H-POSITION, V-POSITION, H-SIZE or V-SIZE press ENTER key to
enter NUMBER SETTING menu.
Press UP or DOWN key to adjust number (Adjusting H-POSITION, V-POSITION,
H-SIZE or V-SIZE).
CONNECTED set OFF, MASK will be fixed.
CONNECTED set ON, MASK will be connected with zoom.
MASK A / B SETING MENU
Move cursor to COMM ID, press ENTER key to enter COMM ID SELECTING menu,
then Press UP or DOWN key to select COMM ID 001~239.
(COMM MODE must set at 1:1)
COMM SETING MENU
-
17 -
Advertisement
Table of Contents
