Using The Phone - Linksys SPA-942 Quick Start Manual

2. equipment overview
Alpha /
Use to enter numbers, letters
numeric
or characters.
Keypad
Access the voice mailbox by pressing
Voicemail
the mailbox button.
Customize the phone using the Setup
setup
options, at any time.
Mute the handset, headset or
speakerphone by pressing the Mute
Mute button. This prevents the person on
the active call from hearing what you
or someone else in the room is saying.
To place and answer calls using
Headset
a headset.
To place and answer calls using
speaker
the speaker.
Press the hold button to put an active
Call Hold
call on hold.
Adjusts the volume of the ringer and
Volume
when on a call, the volume of the call.

3. Using the Phone

Using the Handset, speakerphone or Headset
Calls can be made or received using the handset, speakerphone or headset and you can switch audio devices during a call. Adjust the
volume for the device you are using with the volume adjustment bar.
Using the Handset
To place and answer calls using the handset, simply lift the handset.
To place and answer calls using the speaker, press the speaker button. The green light behind the
Using the speaker
button will illuminate.
Plug an approved headset with a 2.5mm connector into the headset port on the right side of the phone.
Using the Headset Press the headset button and the green light behind the button will illuminate. For information on the
exact models of headsets that are supported, see the IP phone information on http://www.linksys.com.
Any of the audio devices can be used during a call. Only one device at a time can be used. The handset
switching between the
can be on the hook when using the speakerphone or headset function. If switching from the handset,
Handset, Headset or
make sure the speakerphone or headset light is illuminated before placing the handset back on
speaker during a Call
the hook.
Alpha/Numeric Keypad
• Voicemail • Call Hold
• Setup • Volume
• Mute
• Headset
• Speaker