Using The Phone - Linksys SPA-942 Quick Start Manual

2. equipment Overview
alpha /
Use to enter numbers, letters or
numeric
characters.
keypad
Access the voice mailbox by
Voicemail
pressing the mailbox button.
Customize the phone using the
setup
Setup options, at any time.
Mute the handset, headset or
speakerphone by pressing the Mute
Mute button. This prevents the person on
the active call from hearing what you
or someone else in the room is saying.
To place and answer calls using a
Headset
headset.
To place and answer calls using the
speaker
speaker.
Press the hold button to put an
call Hold
active call on hold.
Adjusts the volume of the ringer
Volume
and when on a call, the volume of
the call.

3. using the phone

using the Handset, speakerphone or Headset
Calls can be made or received using the handset, speakerphone or headset and you can switch audio devices during a
call. Adjust the volume for the device you are using with the volume adjustment bar.
using the Handset
using the speaker
using the Headset
switching between
the Handset,
Headset or speaker
during a call
To place and answer calls using the handset, simply lift the handset.
To place and answer calls using the speaker, press the speaker button. The green light
behind the button will illuminate.
Plug an approved headset with a 2.5mm connector into the headset port on the right side
of the phone.
Press the headset button and the green light behind the button will illuminate. For
information on the exact models of headsets that are supported, see the IP phone
information on http://www.linksys.com.
Any of the audio devices can be used during a call. Only one device at a time can be used.
The handset can be on the hook when using the speakerphone or headset function. If
switching from the handset, make sure the speakerphone or headset light is illuminated
before placing the handset back on the hook.
Alpha/Numeric Keypad • Voicemail • Call Hold
• Setup • Volume
• Mute
• Headset
• Speaker