Selecting A Cycle - Whirlpool GDU87OOXT Use & Care Manual

Before starting WUF dishwasher
I.
OPTION SELECTOR BUTTONS
Starting your d ishwrasher
CYCLE SELECTOR BUTTONS
1. Push a Cycle Selector Button for the desired - POTS & PANS and HEAVY WASH Cycles share
cycle. (Use NORMAL WASH for RINSE & HOLD the same spot on the dial. The Cycle Selector
Cycle.) Button determines which cycle operates.
2. Push Option Selector Button for desired option
or options. (Use AIR DRY for RINSE & HOLD
Cycle.)
The dishwasher will automatically start the
selected cycle.
3. Turn Cycle Control Knob clockwise to point to
a desired cycle. You WIII feel a definite stop
at each cycle mark.
Selecting a cycle
POTS & PANS Cycle
Maximum cleaning for cooked- or
baked-on foods. Timer delays while
the dishwasher automatically heats
the water to 145 F (63%) in both
washes and the last rinse (marked '1.
Cycle time will be about 1% to 2
hours, depending on time needed
to heat water.
HEAVY WASH Cycle
A double wash for heavily soiled
loads. Cycle time is about 76
minutes.
NORMAL WASH Cycle
For normal, everyday soiled loads.
(The Energy Guide Label data is
based on this cycle.) Cycle time is
about 168 minutes.
LOW IENERGY WASH Cycle
For pre-rinsed or lightly soiled loads.
Cycle time is about 60 minutes.
RINSE & HOLD Cycle
For rinsing a few items to be washed
one or more days later. Cycle time is
about 'I4 minutes.
Use AIF? DRY only. Do not use HI-TEMP
WASH Option.