Get Started; Set Time, Date And Temperature Units - La Crosse Technology 308-1414 Quick Setup Manual

Battery
Compartment
3 "AAA"
AC Power

GET STARTED

Step 1: Insert the included 5-volt AC power adapter into the weather
station and then plug into wall outlet.
Step 2: Insert 3 new "AAA" Alkaline batteries (not included) into the
weather station. Observe the correct polarity.
Step 3: Insert 2 new "AA" Alkaline batteries (not included) into the
TX141TH-B transmitter. Observe the correct polarity. The red LED will
flash when transmitting.
Restart: If the outdoor temperature is not displayed after 3 minutes,
unplug the AC adapter and remove batteries from the weather station &
transmitter and press any button 20 times. After 15 minutes, return to
Step 1 above.

SET TIME, DATE AND TEMPERATURE UNITS

1. Hold the TIME SET button to enter time set
mode.
2. Press the ▼ or ▲ buttons to adjust values.
3. Press the TIME SET button to confirm adjustments and move to the
next item.
Settings order: 1. WWVB ON/OFF 2. Time Zone
3. Daylight Saving Time 4.12/24 Hour Time Format
5. Hour 6. Minutes 7. Year, 8. Month, 9. Date
10. Fahrenheit/Celsius
Press the TIME SET button to exit, or wait 20 seconds
without pressing buttons to return to the time display.
308-1414B / 308-1414W
Jack
www.lacrossetechnology.com/support
BACK
VIEW
Battery
Cover
Base
Stand
Page | 2