Installing Additional Cards And Storage; Installing An Additional Hard Disk Drive; Figure 2-17 Disk Drive Location - HP Integrity rx8640 Installation Manual

Hide thumbs Also See for Integrity rx8640:
Table of Contents

Advertisement

Installing the System

Installing Additional Cards and Storage

Installing Additional Cards and Storage
This section provides information on additional products ordered after installation and any dependencies for
these add-on products.
The following options can be installed in the server:
Hard disk drive storage
Removable media device storage
PCI/PCI-X I/O cards

Installing an Additional Hard Disk Drive

The disk drives are located in the front of the chassis (Figure 2-17). The hard disk drives are hot-plug drives.
A list of replacement disk drives for the server is in Appendix A of the HP Service Guide. The list contains
both removable media disk drives and hard disk drives.
Figure 2-17
Disk Drive Location
Use the following procedure to install the disk drives:
Step 1. Be sure the front locking latch is open, then position the disk drive in the chassis.
Step 2. Slide the disk drive into the chassis; apply a slow, firm pressure to properly seat the connector.
60
Hard Disks
Chapter 2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

9000 rp8440

Table of Contents