Connecting the Gigaset SE681 WiMAX
Connect the Gigaset SE681 WiMAX in the following order:
1. If you use the outdoor antenna, have it installed by a qualified electrician. Connect
the antenna cable from outside to the Gigaset SE681 WiMAX.
2. Connect the PC to the Gigaset SE681 WiMAX.
3. Connect the Gigaset SE681 WiMAX to the mains power supply and switch all the
devices on.
Connecting the outdoor antenna
Connecting the PC
Use either the Ethernet cable that is supplied or a standard network cable
(CAT-5) to connect the device to the PC. It is not important whether the
!
Ethernet cable has straight or crossed wiring.
Always use a shielded Ethernet cable.
Connecting the Gigaset SE681 WiMAX
ì
Screw the connector of the antenna
cable into the ANT WiMAX connector
on your Gigaset SE681 WiMAX. In
order to disconnect the antenna cable
from the connector, open the screw
connection.
17