Table of Contents
Advertisement
Installing the Gigaset SE681 WiMAX
Installing the Gigaset SE681 WiMAX
If you use the separate outdoor antenna (optional, not included in the scope of
delivery):
The Gigaset SE681 WiMAX can only be used with the device's integrated antenna or
with one of the following outdoor antennas.
3.5 GHz
18 dBi WiMAX
2.6 GHz
15 dBi WiMAX
3.5 GHz versions should be used for the European Economic Area.
The following requirements apply:
All the external antennas used for this product must undergo a confor-
mity assessment procedure.
The 3.5 GHz antennas listed here meet the European requirements and
W
guarantee the functionality of the complete system.
During the conformity assessment procedure it was ensured that the SAR
limits set down in directive 99/519/EC are observed. Verification was per-
formed using EN 50385.
The outdoor antenna must be installed and put into service by a qualified
electrician.
The notes in the enclosed installation instructions must be followed
This user guide assumes that installation of the outdoor antenna has been completed.
Choosing your location
u
Choose a location that enables you to simply set up the following connections with-
out any further work.
– Connect the Ethernet cable for connection to a PC or network.
– Connect the power lead to the mains socket.
u
Stand the Gigaset SE681 WiMAX upright on an even, non-slip surface.
u
Lay the cables in such a way that nobody can tread on or trip over them.
u
Position the Gigaset SE681 WiMAX so that you can see the LEDs.
u
Do not cover the openings in the Gigaset SE681 WiMAX housing to ensure the heat
can circulate; otherwise, the duty cycle of the device will be reduced or the Gigaset
SE681 WiMAX switched off to avoid overheating.
u
Do not operate the Gigaset SE681 WiMAX under the influence of direct heat sources
(e.g. directly in the sun).
14
Antenna Outdoor
Antenna Outdoor
"
"
Antenna cable 3 m
"
"
Antenna cable 3 m
Advertisement
Table of Contents
