ZyXEL Communications NBG-418N User Manual page 33

The following table describes the labels in this screen.
Table 9 Summary: Client Table
LABEL
#
IP Address
Host Name
MAC Address
Interface
IPv6 DHCP Table
#
IPv6 Address
Host Name
Refresh
4.2.1.2 Summary: Packet Statistics
Click the Packet Statistics (Details...) hyperlink in the Status screen. Read-only information
here includes port status, packet specific statistics and the "system up time". The Poll Interval(s)
field is configurable and is used for refreshing the screen.
Figure 23 Summary: Packet Statistics
The following table describes the labels in this screen.
Table 10 Summary: Packet Statistics
LABEL
Port
RxPkts
Rx err
Rx drop
Txpkts
Tx err
Tx drop
System Up Time
Chapter 4 Modes
DESCRIPTION
This is the index number of the host computer.
This field displays the IPv4 address relative to the # field listed above.
This field displays the computer host name.
This field shows the MAC address of the computer with the name in the Host Name field.
Every Ethernet device has a unique MAC (Media Access Control) address which uniquely
identifies a device. The MAC address is assigned at the factory and consists of six pairs of
hexadecimal characters, for example, 00:A0:C5:00:00:02.
This field shows the NBG-418N v2's interface to which the client is connected.
This is the index number of the IPv6 client table.
This field displays the IPv6 address of the host computer.
This field displays the computer host name.
Click Refresh to renew the screen.
DESCRIPTION
This is the NBG-418N v2's port type.
This is the number of received packets on this port.
This is the number of received packets with errors on this port.
This is the number of received packets that were dropped on this port.
This is the number of transmitted packets on this port.
This is the number of transmitted packets with errors on this port.
This is the number of transmitted packets that were dropped on this port.
This is the total time the NBG-418N v2 has been on.
NBG-418N v2 User's Guide
33