F E At U R E S - O P E R At I O N S - Bionaire BT440RC-CN Instruction Leaflet

F E AT U R E S - O P E R AT I O N S

Figure 1
1
2
4
1. Control Panel
2. Fan Housing
3. Remote Control
Storage
1. Assemble base halves around power cord. To secure the
base halves together, slide the posts of one base half
into the slots of the second base half. Refer to Figure 2.
2. Line up the screws holes of the base halves with the
holes located on the bottom of the fan housing.
Secure with the four screws included with the
product. Refer to Figure 2.
3. Turn fan right side up and place on a dry and level surface.
3
5
4. Base Halves
5. Remote Control
Figure 2
OPERATING INSTRUCTIONS:
1. To control the power of the fan press the power/
speed button located on the control panel or
remote control.
2. To cycle through high, medium, and low speed
settings press the power/speed button located on the
control panel or remote control.
3. To turn the oscillation on and off, press the oscillation
button located on the control panel or remote control.
4. To set your fan to automatically shut off press the
timer button located on the control panel or the
remote control. When set, the fan will run and
automatically shut off after the set duration of time
(1, 2, 4, or 8 hours) has expired.
5. To activate the breeze mode, press the breeze button
located on the control panel or remote control. When
(SEE FIGURE 3)