Page 2
WARNING IMPORTANT ADVICE: THESE INSTRUCTIONS ESSENTIALLY DESCRIBE THE INSTALLATION OF THE ART300-24MB DRIVE WITH THE ACCESSORY ARM ART-3, FOR INSTALLATION ON A SWING DOOR. IF THE ART-1 FOLDING DOOR ARM OR THE SPACE-SAVING ART-2 DOOR ARM ARE INSTALLED IT IS ESSENTIAL TO FOLLOW THE INSTRUCTIONS INCLUDED WITH THOSE ITEMS.
Page 3
ELECTRICAL INSTALLATION (FIG.11) purposes of fitting the drive, the lock screws need to be re-inserted and We recommend the use of control unit MB206. tightened up. ART300-24MB Terminal Block: 1= 24V Motor Supply GATE FITTING 2= 24V Motor Supply 3= L1(OPEN/CLOSE) NC Limit For steel gates, fixings should be welded on or through bolted.
Page 4
Should the force generated by the moving wing at its closing edge exceed 400 N, additional safety features must TECHNICAL DATA be fitted suitable for the application. Modell ART300-24MB Voltage in VAC 230V AC/24AC/24VDC Voltage out (Motor) VDC 24 Power...