Bypass Operation; Static Transfer Switch - Liebert 50 and 60 Hz User Manual

3.5

Bypass Operation

$ýIDFWRU\ðLQVWDOOHGý6WDWLFý7UDQVIHUý6ZLWFKýSURYLGHVýDQýDOWHUQDWHýSDWKýIRUýSRZHUýWRýWKHýFULWLFDOýORDGý
WKDWýFDQýEHýVHOHFWHGýE\ýWKHýPLFURSURFHVVRUïý
3.5.1

Static Transfer Switch

,QýWKHýHYHQWýRIýRYHUORDGýFRQGLWLRQVýRUýLQYHUWHUýIDLOXUHñýGHWHFWLRQýDQGýDXWRPDWLFýSKDVHýV\QFKURð
QL]HGýWUDQVIHUýWRýõDQGýIURPôýWKHýVWDWLFýWUDQVIHUýVZLWFKýZLOOýRFFXUï
Figure 24 LCD Menu Tree
One of the three default screens will show on the unit depending on the status of the unit at the time. If the unit
is in the process of starting up the Initial Start Up screen will be displayed. If the unit is operating normally, the
Normal Operation screen will be displayed. In the event there are alarms present, the Warning screen will be
displayed.
Toggle between screens by pressing enter to descend in the menu and escape to move up through the menu.
This drawing is only an overview representation of the available screens.
For further detail on Configuration Options, see Figure 25.
46 Operation