Auto Power Off Function; Setting The Volume; Selecting An Eq Setting For The Best Sound; Changing The Touch Response Of The Keyboard - Yamaha PSR-E353 Owner's Manual

Setting Up

Auto Power Off Function

To prevent unnecessary power consumption, this
instrument features an Auto Power Off function that
automatically turns the power off if the instrument is
not operated for a specified period of time. The
amount of time that will elapse before the power is
automatically turned off is set by default to 30 minutes.
 To set the time that elapses before Auto
Power Off is executed:
Press the [FUNCTION] button several times until
"AutoOff" (Function 045; page 42) appears, then use
the [+] or [-] button to select the desired value.
Settings: OFF, 5, 10, 15, 30, 60, 120 (minutes)
Default value: 30 (minutes)
 To disable the Auto Power Off function:
Turn off the power, then press the [
switch to turn on the power while holding down the
lowest key. The Auto Power Off function also can be
disabled by selecting Off in Function number 045
(page 42).
NOTE
• Generally, the data and settings are maintained even when the
power is turned off. For details, see page 43.
NOTICE
• Depending on the instrument status, the power may not
turn off automatically, even after the elapse of the specified
period of time. Always turn off the power manually when
the instrument is not in use.
• When the instrument is not operated for a specified period
of time while connected to an external device such as an
amplifier, speaker or computer, make sure to follow the
instructions in the Owner's Manual to turn off the power to
the instrument and the connected devices, in order to pro-
tect the devices from damage. If you do not want the
power to turn off automatically when a device is con-
nected, disable Auto Power Off.

Setting the Volume

When you start playing, use the [MASTER VOLUME]
dial to adjust the volume of the entire keyboard
sound.
CAUTION
• Do not use this instrument at a high volume level for a long
period of time, or your hearing may be damaged.
14
PSR-E353 Owner's Manual
Selecting an EQ Setting for the
Best Sound
Six different master equalizer (EQ) settings give you
the best possible sound when listening through differ-
ent reproduction systems—the instrument's internal
speakers, headphones, or an external speaker sys-
tem.
1
Hold down the [ULTRA-WIDE STEREO]
button for longer than a second to call
up "024 MasterEQ" (Function 024; page
41).
"MasterEQ" is shown in the display for a few sec-
onds, and the current Master EQ type appears.
] (Standby/On)
2
Use the [+] or [-] button to select the
desired Master EQ type.
Master EQ types
Changing the Touch Response of
the Keyboard
You can specify the Touch Response (how the sound
responds to your playing strength). This can be set
via Function number 007 (page 40).
MasterEQ
024
Hold for longer
than a second.
Speaker
1
024
Optimum for listening via the instru-
1 Speaker
ment's built-in speakers.
Optimum for headphones, or for listen-
2 Headphone
ing via external speakers.
3 Boost Features more powerful sound.
4 Piano Optimum for piano solo performance.
Lowers the mid range for a brighter
5 Bright
sound.
Lowers the high range for a softer
6 Mild
sound.
Current Master
EQ type