7-3.Error Display - LG WD(M)-10130(5)F Service Manual

7-3.ERROR DISPLAY.

If you press the Start/Pause button when an error in displayed, any error except S/W ERROR will disappear
and the machine will change into pause status.
In case of SENSOR PRESSURE S/W ERROR
error is not resolved within 20 sec. In the case of other errors, if the error is not resolved within 4 min. power
will be turned off automatically and the error code will be blinked. But in case of
power will not be turned off.
ERROR
1 WATER INLET
ERROR
2 IMBALANCE
ERROR
3 DRAIN ERROR
4 OVERFLOW
ERROR
5 SENSOR PRESSURE
S/W ERROR
6 DOOR OPEN
ERROR
7 HEATING
ERROR
SYMPTOM
Rinse+
Crease Care
1000
800
400
No Spin
Rinse Hold
Pre Wash
Time Save
Pre Wash Rinse+
Crease Care
Time Save
water is in the tub.
Pre Wash
95˚C
60
Time Save
40
30
Cold
Pre Wash Rinse+
95˚C
60
Crease Care
Time Save
40
30
Cold
95˚C
60
40
30
Cold
HEATING ERROR
Water has not reached to the pre-set level within 4 min. since
inlet valve operated, or water has not reached to the normal
level within 25 min.
The appliance is tilted.
Laundry is gathered to one side.
Non distributable things are put into the drum.
Water has not drained enough within 5 min.
Water is automatically being pumped out because too much
The sensor pressure switch is out of order.
Start/Pause
The button is pressed with the door open.
The door switch is out of order.
The thermistor is out of order.
16
DOOR OPEN ERROR
OVER FLOW ERROR ,
if the