Checking The Power Supply Voltage - Sony SRW-9000 Operation Manual

<MARKER SETTING> page
Item Function
CURSOR Select the type (BOX/CROSS) of the
cursor to be displayed.
POS1 H/V Set the H (horizontal) position
(–958 to +956) and the V (vertical)
position (–538 to +536) of the center.
SIZE W/H Set the width (from the center to right
or left side) (16 to 1920) and the
height (from the center to top or
bottom) (16 to 1080) of the cursor.
Checking the Power Supply
Voltage
You can check the NEAR END and END
settings, which specify trigger values for low
voltage warnings, on the <BATTERY ALARM>
page of the Camera >USER (OPERATION)
menu.
<BATTERY ALARM> page
Item Indication
BATT TYPE Selects the type of battery to
check.
NEAR END Displays the NEAR END value of
the battery selected with BATT
TYPE.
END Displays the END value of the
battery selected with BATT TYPE.
DCIN TYPE Selects the type of power supply to
check.
Item Indication
NEAR END Displays the NEAR END value of
the power supply selected with
DCIN TYPE.
END Displays the END value of the
power supply selected with DCIN
TYPE.
The only items that can be changed on this page
are the two TYPE items (BATT TYPE and DCIN
TYPE), which specify the type of battery or
power supply to check. If you want to change the
values, use the <BATT ALARM SET> page of
the Camera >MAINTENANCE menu.
Viewing Settings and Indications in the Viewfinder 67