Using Your Cooktop; Using The Control Knobs - Whirlpool RC8920XRH Use And Care Manual

Using your cooktop
SURFACE
UNIT
INDICATORS
LEFT
REAR
SURFACE
UNIT
CONTROL
GRILL
CONTROL OR
LEFl FRONT
SURFACE
UNIT
CONTROL
RIGHT
REAR
SURFACE
UNIT
CONTROL
RIGHT
REAR
SURFACE
UNIT
CONTROL
(OR GRILL
CONTROL ON
RC8920XRH)
SIGNAL
LIGHT
VENT
SYSTEM
CONTROL
1.
Using the Control Knobs
Surface Unit Indicators
Surface unit indicators show the surface unit
or module operated by that control knob.
-- l
The solid dot shows the sur-
I
face unit that is controlled by
that knob.
/
l
The solid box shows that a
-/
module, such as a grill, can
1
be controlled by that knob.
/
l
The solid dot inside the box
I
shows the surface unit con-
trolled if a surface unit mod-
ule is installed
PUSH IN
AND TURN
Control knobs must be pushed in before
turning them to a setting. There is a click at HI,
LO and OFF, but they can be set anywhere
between HI and OFF.
Signal light
The signal light will glow when any surface
unit or module is ON. Be sure the light is OFF
when you are not cooking.
NOTE: The grill and griddle modules are oper-
ated with the tront control knob in the section
being used.