Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
Advertisement
Table of Contents
Related Manuals for Datavideo RMC-230
Summary of Contents for Datavideo RMC-230
-
Page 2: Table Of Contents
Contents Warnings and Precautions ..............3 Warranty ....................4 Standard Warranty ................. 4 Two Year Warranty ................. 4 Disclaimer of Product & Services ........... 5 Disposal ..................5 Packing List ..................5 Product Overview ................6 Features ....................6 System Diagram .................. 7 Control Panel .................. -
Page 3: Warnings And Precautions
AC adapter. If you are not sure of the type of power available, consult your Datavideo dealer or your local power company. 8. Do not allow anything to rest on the power cord. Do not locate this unit where the power cord will be walked on, rolled over, or otherwise stressed. -
Page 4: Warranty
Drives, Hard Drives are only covered for the first 10,000 hours, or 1 year (whichever comes first). Any second year warranty claims must be made to your local Datavideo office or one of its authorized Distributors before the extended warranty expires. -
Page 5: Disclaimer Of Product & Services
Disclaimer of Product & Services The information offered in this instruction manual is intended as a guide only. At all times, Datavideo Technologies will try to give correct, complete and suitable information. However, Datavideo Technologies cannot exclude that some information in this manual, from time to time, may not be correct or may be incomplete. -
Page 6: Product Overview
MCU-100S/P/J and MCU-200S/P/J. It acts as an interface connected between an MCU unit and the cameras. One end of the RMC-230 is connected to the camera via AD-1S/P/J and another end of the RMC-230 is connected to the MCU units, which are cost effective remote controllers designed specifically for remote control of SONY and Panasonic video cameras and camcorders. -
Page 7: System Diagram
System Diagram... - Page 8 Connect the RJ-45 connectors of the RMC-230 and AD-1 via Cat. 5e cable. The DC power adaptor must be connected to the first RMC-230 unit. If the user has to connect the second or the third unit, the user can use the DC power cable to cascade the units using another power connector.
-
Page 9: Control Panel
Control Panel T-Bar Adjustment of iris value High iris transition speed button High iris transition speed Medium iris transition speed button Medium iris transition speed... - Page 10 Slow iris transition speed button Slow iris transition speed 7-Segment Display Screen Displays Iris and Shutter values LEDs IRIS ON: Manual mode IRIS OFF: Auto mode ON: SONY camera shutter ON OFF: SONY camera shutter OFF SHTR ON: Shutter speed display SHTR OFF: IRIS value display Deg ON: Shutter angle is displayed Deg OFF: Shutter speed is displayed...
-
Page 11: Rear Panel
Rear Panel RJ-45 Port (AD1) Connection to AD1 USB Port Connection to the PC for F/W Upgrade PWR Cascade Powers another RMC-230 to cascade multiple RMC-230s DC-IN 12V Power supply RJ-45 Port (MCU) Connection to MCU... -
Page 12: Firmware Upgrade
Press and Hold the shutter button Turn on the RMC-230. 7-segment display of the RMC-230 will display “L-0.5”, and the PC will detect the RMC-230 and recognize it as a USB device. Open the “RMC-230_U1” disk drive on the PC. -
Page 13: Dimensions
Dimensions All measurements in millimetres (mm) -
Page 14: Frequently-Asked Questions
Frequently-Asked Questions This section describes problems that you may encounter while using RMC-230. If you have questions, please refer to related sections and follow all the suggested solutions. If problem still exists, please contact your distributor or the service center. -
Page 15: Specifications
Specifications Input/Output RJ-45 x 2 Connection Power Jack DC IN x 1 Power Cascade x 1 F/W Upgrade USB x 1 Display 7-segment Display and LED Power DC 12V Operating temperature.：0～50°C Environmental Conditions Storage temperature：-10～60°C Dimension 150 x 90 x 97.6mm Weight 0.6kg... -
Page 16: Service & Support
Service & Support...