Argus Bean Bean - Carabiner User Manual page 8

3. Camera Setup
3.1 Battery
This digital camera uses a rechargeable li-ion battery. Before
using this camera please charge the battery for at least 4 hours.
The battery can be charged by connecting the camera
to computer via the USB cable.
Note: When the camera is charging, the Charge LED is Red
and this light turns off when charging is complete. If charging
the camera via USB, turn the camera off before connecting it to
the computer.
3.2 Insert a memory card
Insert the memory card to the card slot carefully with the label
facing the LCD screen.
Attention:
 If the SD card does not go completely into the slot, do not
force it; remove and insert again.
 To remove the card press the edge of the card gently and
then release it.
7