Projector Status Indicators - LG AN110B-JD Owner's Manual

Part Descriptions

Projector Status Indicators

* Lamp Indicator, operation indicator and temperature indicator at the top of the projector show the user the operating status
of the projector.
Operation Indicator
Lamp Indicator
Temperature Indicator
* If operation indicator is red, it's state of checking the closed door or shutter.
10
Orange Standby.
Lamp cooling until the lamp turn on.
Green(flashing)
On operation. (Turn on the lamp)
Green
Orange(flashing) Projector lamp is cooling as power out (2 minutes)
Off Power off.
Projector lamp is reaching the end of its life and needs
to be replaced with a new lamp. (over 4000 hours)
Red
The OSD, "Replace the lamp" is displayed 5 seconds
from the first power on.
The projector has trouble in the lamp or around it at
power-on. Retry Power On again later. If lamp indicator
Red(flashing)
is red (flashing) again, contact a service center.
The lamp cover is not closed.
Green(flashing)
It's state of not opening well the door or shutter. Contact a
Orange(flashing)
service center.
This projector is in high temperature. Turn the power of
Orange
projector off and check the ventilator.
The projector is turned off as its high temperature.
Red
Power has turned off due to problem with the
Red (flashing)
internal cooling fan. Contact a service center.
Operation Indicator
Lamp Indicator
Temperature Indicator