Table of Contents
Advertisement
✎
Notes
Do not forcefully remove the microSD card.
Doing so might cause a fault, damage, or loss
of data.
After being used for a long period, the microSD
card that you removed may be hot, but this is
not a problem.
Charging
The internal battery is not fully charged at
the time of purchase. Be sure to charge
the battery before using the product.
When the illuminated red charging light
turns off, charging is complete.
✎
Notes
While charging, the product becomes hot, but
this is not abnormal.
If you use the camera or other functions while
charging, the time it takes to charge might
lengthen.
Turning on the torch while charging causes
charging to stop. Turn off the torch to resume
charging.
Doing various operations while the product is
connected to a power adapter may cause you
to repeatedly charge and discharge the battery
in short intervals, and the duration of a single
use will shorten.
If the ambient temperature or the temperature
of the product becomes too hot or too cold,
charging may stop. Whenever possible, try to
charge at room temperature.
Things to Check and Setup Before Use
If the product's charging light begins flashing
red, check whether it is connected properly. If it
continues flashing, stop charging.
To keep water and dust from entering, securely
close the external connection terminal cover
after charging is complete. Do not strongly pull
or twist the cover.
If you stop charging when the charging light is
still illuminated, the product may not be fully
charged, even if the
this case the usage life will be shorter.
Do not charge wirelessly while a power
adapter or microUSB cable is connected. This
can not only prevent proper charging, it might
cause a fault.
While charging the electric current can affect
magnetism, so the geomagnetic sensor might
not function properly.
GB 35
icon is displayed. In
Advertisement
Table of Contents
