Inserting/Removing A Nano Sim Card - Kyocera KC-S701 User Manual

✎
Notes
While calling, be careful not to cover the
microphone or noise cancelling microphone of
the product with your finger, etc.
When earphones are connected, sound comes
from the earphones and not from the SMART
SONIC RECEIVER.
Do not put any stickers or clear film on the
display. Sounds from the receiver can become
harder to hear.
The ease of hearing depends on the person.
A person's ability to hear varies depending on
the surrounding environment.
Inserting/Removing a
Nano SIM Card
Unplug the power adapter or other micro
USB plug from the product when

inserting/removing a nano SIM card.

✎
Notes
If a nano SIM card is inserted, the product can
make phone calls and transfer data. Available
mobile networks are different depending on
the country and the region. Connecting to the
network may require configuration of the
product. If you are unable to connect the
product to a network, please contact your
service provider.
Depending on the nano SIM card, there is a
chance that inserting the nano SIM card might
damage the product or the card, itself.
Things to Check and Setup Before Use
KYOCERA does not cover damage caused by
those or any modified nano SIM cards in the
warranty, and assumes no such responsibility.
Inserting a nano SIM card
1
Turn off the product, and open
the card slot cover.
2
Check the alignment of the nano
SIM card, and slowly insert it
straight until you hear it click.
When inserting, make sure there is a
click to signify it locking. If you
remove your finger before the nano
SIM card is locked in place, it may
come flying out.
The nano SIM card slot is on the left
side, while the microSD card slot is
on the right, as illustrated below.
3
Close the card slot cover.
GB 32