Ethernet Wan; Dynamic Ip Address - D-Link DWR-922 User Manual

Section 3 - Configuration

Ethernet WAN

Select your Internet connection type from the list of options. This information cab
be obtained from your ISP. The page will update with the appropriate options for
the selection connection type.

Dynamic IP Address

Hostname:
The hostname is optional but may be required by some ISPs. Leave
it blank if you are not sure.
MTU: Maximum Transmission Unit - you may need to change the MTU
for optimal performance with your ISP. The default value is 1500.
NAT: Check the box to enable Network Address Translation (NAT).
IGMP Proxy: Check the box to enable IGMP proxy.
Enable PPPoE Check the box to enable PPPoE passthrough.
Passthrough:
Enable IPv6 Check the box to enable IPv6 passthrough.
Passthrough:
Clone MAC: Check the box to clone your client's MAC address to the WAN port.
DNS Mode: If your ISP provided DNS server addresses to use, select Manual
DNS and enter the primary and (if applicable) secondary
addresses. Otherwise, select Auto DNS to automatically assign a
DNS server, or DNS Disabled to disable DNS.
D-Link DWR-922 User Manual 10