Security; Firewall - D-Link DWR-922 User Manual

Section 3 - Configuration
This page allows you to configure your firewall, DDoS, SPI, and MAC filter settings.

Security:

Select either Firewall, DDoS & SPI, or MAC Filter to bring up the
relevant settings for that security type
The Firewall option allows you to configure the DWR-922's firewall, and allow or
deny access to your network over specific ports and addresses.

Firewall

To configure a new firewall interface, first enter a Name, and
Interface: specify the Interface, Type, and the Default Action. Click Apply
to save the new interface.
Firewall Rules:
To configure the firewall rules, you must have first configured
a firewall interface (see above). Select an interface you have
configured from the drop-down menu. You can select whether
the rule is Enabled or Disabled, to temporarily turn it on or off
without removing it entirely.
Next, fill out the source and destination IP and port information,
and select the Protocol and Action. Selecting an action will
override the default action set in the firewall interface.
Click Apply to save the rule.
D-Link DWR-922 User Manual
Firewall
Security
30