Ethernet Wan Connection - D-Link DSL-2750U Quick Installation Manual

DSL-2750U

Ethernet WAN Connection

1. Go to the Advanced / EtherWAN page.
2. Place the mouse pointer on the router's LAN port that will be used as the
WAN port and left-click it. Click the Apply button.
3. Go to the Net / WAN page, select the WAN connection and click the
Delete button. Save the settings and wait until the router is rebooted.
4. Go to the Net / WAN page and click the Add button.
5. From the Connection Type drop-down list, select the needed value.
6. From the Interface drop-down list, select the value corresponding to the
LAN port that will be used as the WAN port.
7. Specify a name for your connection (any name for easier identification) in
the Name field.
Quick Installation Guide
27