Operation; Turning The Tv On And Off; Plug & Play Feature - Samsung LN-S4095D Owner's Instructions Manual

Operation

Turning the TV On and Off

Plug & Play Feature
When the TV is initially powered on, two basic settings proceed automatically and subsequently:
Press the POWER
button on the remote control.
You can also use the POWER
1
Press the
The message "Menu language, Channels and Time will
be set." is displayed.
Press the ENTER
of the OSD" menu is automatically displayed.
2
Press the
then the
We recommend setting the TV to Home mode for the best picture in your
home environment.
Shop mode is only intended for use in retail environments.
If the unit is accidentally set to Shop Mode, press and hold the
button on the side panel of the TV for five seconds to return to Dynamic
(Home) mode.
3
Press the
Press the
ENTER
"Select the antennas to memorize" menu is automatically
displayed.
4
Press the
the selected connection.
Press the
If the antenna is connected to ANT 1(AIR), select "Air" and if it is
connected to ANT 2 (CABLE), select "Cable".
If both ANT 1 (AIR) and ANT 2 (CABLE) are connected, select "Air + Cable".
In Cable mode, you can select the correct signal source among STD,
HRC, and IRC by pressing the
ENTER
Contact your local cable company to identify the type of cable system
that exists in your particular area.
English-15
button on the front of the panel.
POWER button on the remote control.
button, then "Select the language
or buttons to select "Shop" or "Home",
ENTER button.
ENTER button to enter the language.
or button to select language, then the
button.
or button to memorize the channels of
ENTER button to select "Start".
or
button.
MENU
button, then press the
continued...