Related Manuals for AOC E2276VW6
Summary of Contents for AOC E2276VW6
- Page 1 LCD Monitor User Manual E2276VW6/E2276VWM6/E2476VW6/E2476VWM6 (LED Backlight) www.aoc.com ©2014 AOC.All Rights Reserved.
-
Page 2: Table Of Contents
Setup Stand & Base ............................ 9 Adjusting Viewing Angle ..........................10 Connecting the Monitor ..........................11 Wall Mounting ............................12 AOC Anti-Blue Light Feature Description ......................13 Adjusting ................................14 Setting Optimal Resolution ........................14 Windows 8 ............................14 Windows 7 ............................15 Windows Vista ............................ - Page 3 Warranty Statement for Europe ......................... 65 Warranty Statement for Middle East and Africa (MEA) ................67 AOC PIXEL POLICY ISO 9241-307 CLASS 1 ..................69 Warranty Statement for North & South America (excluding Brazil) ............70 EASE PROGRAME ........................... 72...
-
Page 4: Safety
Safety National Conventions The following subsections describe notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, cautions, and warnings, and they are used as follows: NOTE: A NOTE indicates important information that helps you make better use of your computer system. -
Page 5: Power
Power The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power outlet as a safety feature. -
Page 6: Installation
Installation Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this product. -
Page 7: Cleaning
Cleaning Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of strong-detergent which will cauterize the product cabinet. When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough as it will scratch the screen surface. -
Page 8: Other
Other If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and contact a Service Center. Make sure that the ventilating openings are not blocked by a table or curtain. Do not engage the LCD monitor in severe vibration or high impact conditions during operation. Do not knock or drop the monitor during operation or transportation. -
Page 9: Setup
Monitor Base Analog Cable DVI Cable HDMI Cable MHL Cable Not all signal cables (Analog, DVI, MHL and HDMI cables) will be provided for all countries and regions. Please check with the local dealer or AOC branch office for confirmation. -
Page 10: Setup Stand & Base
Setup Stand & Base Please setup or remove the base following the steps as below. Setup: Remove:... -
Page 11: Adjusting Viewing Angle
Adjusting Viewing Angle For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor's angle to your own preference. Hold the stand so you will not topple the monitor when you change the monitor's angle. You are able to adjust the monitor's angle from -4°... -
Page 12: Connecting The Monitor
E2276VW6/E2476VW6 E2276VWM6/E2476VWM6 AC port Analog (D-Sub 15-Pin VGA cable) DVI (E2276VW6/E2476VW6) HDMI/MHL (E2276VWM6/E2476VWM6) Earphone (E2276VWM6/E2476VWM6) To protect equipment, always turn off the PC and LCD monitor before connecting. Connect the power cable to the AC port on the back of the monitor. -
Page 13: Wall Mounting
Reconnect the cables. Refer to the user's manual that came with the optional wall mounting arm for instructions on attaching it to the wall. Noted : VESA mounting screw holes are not available for all models, please check with the dealer or official department of AOC. -
Page 14: Aoc Anti-Blue Light Feature Description
Studies have shown that just as ultra-violet rays can cause eye damage, blue light rays from LED displays can cause damage to different parts of the eye and affect vision over time. AOC Anti-Blue Light feature uses a smart technology to... -
Page 15: Adjusting
Adjusting Setting Optimal Resolution Windows 8 For Windows 8: Right click and click All apps at the bottom-right of the screen. Set the “View by” to “Category”. Click Appearance and Personalization. -
Page 16: Windows 7
Click DISPLAY. Set the resolution SLIDE-BAR to Optimal preset resolution. Windows 7 For Windows 7: Click START. Click CONTROL PANEL. - Page 17 Click Appearance. Click DISPLAY. Set the resolution SLIDE-BAR to Optimal preset resolution...
-
Page 18: Windows Vista
Windows Vista For Windows Vista: Click START. Click CONTROL PANEL. Click Appearance and Personalization. Click Personalization... - Page 19 Click Display Settings. Set the resolution SLIDE-BAR to Optimal preset resolution...
-
Page 20: Windows Xp
Windows XP For Windows XP: Click START. Click SETTINGS. Click CONTROL PANEL. Click Appearance and Themes. Double click DISPLAY. -
Page 21: Windows Me/2000
Click SETTINGS. Set the resolution SLIDE-BAR to Optimal preset resolution Windows ME/2000 For Windows ME/2000: Click START. Click SETTINGS. Click CONTROL PANEL. Double click DISPLAY. Click SETTINGS. Set the resolution SLIDE-BAR to Optimal preset resolution... -
Page 22: Hotkeys
Hotkeys E2276VW6/E2476VW6 E2276VWM6/E2476VWM6 Clear vision /< Clear vision /< 4:3 or wide /> Volume / > or 4:3 / Wide / > Power Power Source/Auto/Exit Source/Auto/Exit Menu/Enter Menu/Enter Power Press the Power button to turn on/off the monitor. Volume / > (E2276VWM6/E2476VWM6) When there is no OSD, press >... -
Page 23: Clear Vision
Clear Vision When there is no OSD, Press the “<” button to activate Clear Vision. Use the “<” or “>” buttons to select between weak, medium, strong, or off settings. Default setting is always “off”. Press and hold “<” button for 5 seconds to activate the Clear Vision Demo, and a message of “Clear Vision Demo: on”... -
Page 24: Using "Mhl(Mobile High-Definition Link)
Using “MHL(Mobile High-Definition Link)” “MHL” (Mobile High-Definition Link) This feature allows you to enjoy videos and photos(imported from a connected mobile device that supports MHL) on the screen of the product. ● To use the MHL function, you need an MHL-certified mobile device. You can check if your mobile device is MHL certified on the device manufacturer’s website. -
Page 25: Osd Setting
OSD Setting Basic and simple instruction on the control keys. Image Setup Color Setup Picture Boost OSD Setup Extra Exit Luminance Gamma 1 Contrast Gamma Brightness Overdrive Medium Eco mode Standard Press the -button to activate the OSD window. Press < or > to navigate through the functions. Once the desired function is highlighted, press the -button to activate it . -
Page 26: Luminance
Luminance Luminance Image Setup Color Setup Picture Boost OSD Setup Extra Exit Gamma 1 Contrast Gamma Brightness Standard Overdrive Medium Eco mode Press (Menu) to display menu. Image Setup Color Setup Picture Boost OSD Setup Extra Exit Luminance Gamma 1 Contrast Gamma Brightness... - Page 27 Luminance Image Setup Color Setup Picture Boost OSD Setup Extra Exit Contrast Gamma Gamma 1 Brightness Standard Eco mode Overdrive Medium Press < or > to adjust. Image Setup Color Setup Picture Boost OSD Setup Extra Exit Luminance Gamma 1 Contrast Gamma Brightness...
-
Page 28: Image Setup
Image Setup Luminance Image Setup Color Setup Picture Boost OSD Setup Extra Exit Gamma 1 Contrast Gamma Brightness Standard Overdrive Medium Eco mode Press (Menu) to display menu. Image Setup Color Setup Picture Boost OSD Setup Extra Exit Luminance Clock H.Position Phase V.Position... - Page 29 Image Setup Color Setup Picture Boost OSD Setup Extra Exit Luminance Clock H.Position Phase V.Position Sharpness Press < or > to adjust. Image Setup Color Setup Picture Boost OSD Setup Extra Exit Luminance Clock H.Position Phase V.Position Sharpness Press to exit. Clock 0-100 Adjust picture Clock to reduce Vertical-Line noise.
-
Page 30: Color Setup
Color Setup Luminance Image Setup Color Setup Picture Boost OSD Setup Extra Exit Gamma 1 Contrast Gamma Brightness Standard Overdrive Medium Eco mode Press (Menu) to display menu. Color Setup Picture Boost OSD Setup Extra Exit Luminance Image Setup Color Temp. Warm DCB Mode Green... - Page 31 Color Setup Picture Boost OSD Setup Extra Exit Luminance Image Setup Color Temp. Warm DCB Mode Green DCB Demo Blue Press < or > to adjust. Color Setup Picture Boost OSD Setup Extra Exit Luminance Image Setup Color Temp. Warm DCB Mode Green DCB Demo...
-
Page 32: Picture Boost
Picture Boost Luminance Image Setup Color Setup Picture Boost OSD Setup Extra Exit Gamma 1 Contrast Gamma Brightness Standard Overdrive Medium Eco mode Press (Menu) to display menu. Picture Boost OSD Setup Extra Exit Luminance Image Setup Color Setup Brightness H. - Page 33 Picture Boost OSD Setup Extra Exit Luminance Image Setup Color Setup Bright Frame Brightness H. position Frame Size Contrast V.position Press < or > to adjust. Picture Boost Image Setup OSD Setup Extra Exit Luminance Color Setup Bright Frame Brightness H.
-
Page 34: Osd Setup
OSD Setup Luminance Image Setup Color Setup Picture Boost OSD Setup Extra Exit Gamma 1 Contrast Gamma Brightness Standard Overdrive Medium Eco mode Press (Menu) to display menu. OSD Setup Extra Exit Luminance Image Setup Picture Boost Color Setup English Language H. - Page 35 OSD Setup Extra Exit Luminance Image Setup Color Setup Picture Boost Language English H. position Transparence Timeout Break Reminder V.position Press < or > to adjust. OSD Setup Extra Exit Luminance Image Setup Picture Boost Color Setup English Transparence Language H.
-
Page 36: Extra
Extra Luminance Image Setup Color Setup Picture Boost OSD Setup Extra Exit Gamma 1 Contrast Gamma Brightness Standard Overdrive Medium Eco mode Press (Menu) to display menu. Image Setup Picture Boost OSD Setup Extra Exit Luminance Color Setup Input Select Image Ratio wide Resolution: 1920(H)x1080(V) -
Page 37: Input Select
V. Frequency: 60Hz Press to exit. Input Select Auto / D-SUB / DVI Select Input Signal Source (E2276VW6/E2476VW6) Input Select Auto / D-SUB / HDMI(MHL) Select Input Signal Source (E2276VWM6/E2476VWM6) Auto Config yes or no Auto adjust the picture to default... -
Page 38: Exit
Exit Luminance Image Setup Color Setup Picture Boost OSD Setup Extra Exit Gamma 1 Contrast Gamma Brightness Standard Overdrive Medium Eco mode Press (Menu) to display menu. Extra Exit Luminance Image Setup Picture Boost OSD Setup Color Setup Press < or > to select (Exit), and press to exit. -
Page 39: Led Indicator
LED Indicator Status LED Color Full Power Mode White Active-off Mode Orange... -
Page 40: Driver
Driver Monitor Driver Windows 8 Start Windows® 8 Right click and click All apps at the bottom-right of the screen. Click on the “Control panel” icon Set the “View by” to “Large icons” or “Small icons”. - Page 41 Click on the “Display” icon. Click on the “Change display settings” button. Click the “Advanced Settings” button.
- Page 42 Click the “Monitor” tab and then click the “Properties” button. Click the “Driver” tab. 10. Open the “Update Driver Software-Generic PnP Monitor” window by clicking on “Update Driver... “ and then click the "Browse my computer for driver software" button.
- Page 43 11. Select "Let me pick from a list of device drivers on my computer". 12. Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory: X:\Driver\module name (where X is the drive letter designator for the CD-ROM drive). 13.
-
Page 44: Windows 7
Windows 7 Start Windows® 7 Click on the 'Start' button and then click on 'Control Panel'. Click on the 'Display' icon. Ckick on the “Change display settings” button. - Page 45 Click the “Advanced Settings” button. Click the “Monitor” tab and then click the “Properties” button. Click the “Driver” tab.
- Page 46 Open the "Update Driver Software-Generic PnP Monitor" window by clicking on “Update Driver... “and then click the "Browse my computer for driver software" button. Select "Let me pick from a list of device drivers on my computer". 10. Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory: X:\Driver\module name (where X is the drive letter designator for the CD-ROM drive).
-
Page 47: Windows Vista
Windows Vista Click "Start " and "Control Panel". Then, double-click on "Appearance and Personalization". Click "Personalization" and then "Display Settings". Click "Advanced Settings...". - Page 48 Click "Properties" in the "Monitor" tab. If the "Properties" button is deactivated, it means the configuration for your monitor is completed. The monitor can be used as is. If the message "Windows needs..." is displayed, as shown in the figure below, click "Continue". Click "Update Driver..."...
-
Page 49: Windows Xp
Windows XP Start Windows® XP Click on the 'Start' button and then click on 'Control Panel'. Select and click on the category ‘Appearance and Themes’ Click on the 'Display' Item. - Page 50 Select the 'Settings' tab then click on the 'Advanced' button. Select 'Monitor' tab - If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation. - If the 'Properties' button is active, click on 'Properties' button. Please follow the steps below.
- Page 51 Select the 'Install from a list or specific location [advanced]' radio button and then click on the 'Next' button. Select the 'Don't Search. I will choose the driver to install' radio button. Then click on the 'Next' button. 10. Click on the 'Have disk...' button, then click on the 'Browse...' button and then select the appropriate drive F: (CD- ROM Drive).
-
Page 52: Windows 2000
Windows 2000 Start Windows® 2000 Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'. Double click on the 'Display' Icon. Select the 'Settings' tab then click on 'Advanced...'. Select 'Monitor' - If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation. - If the 'Properties' button is active. -
Page 53: I-Menu
Welcome to “i-Menu” software by AOC. i-Menu makes it easy to adjust your monitor display setting by using on screen menus instead of the OSD button on the monitor. To complete installation, please follow the installation guide. -
Page 54: E-Saver
Welcome to use AOC e-Saver monitor power management software! The AOC e-Saver features Smart Shutdown functions for your monitors, allows your monitor to timely shutdown when PC unit is at any status (On, Off, Sleep or Screen Saver); the actual shutdown time depends on your preferences (see example below). -
Page 55: Screen
Screen+ Welcome to "Screen+" software by AOC, Screen+ software is a desktop screen splitting tool, it splits the desktop into different panes, each pane displays a different window. You only need to drag the window to a corresponding pane, when you want to access it. -
Page 56: Troubleshoot
Adjust the maximum resolution and frequency that the monitor can handle properly. • Make sure the AOC Monitor Drivers are installed. Adjust the Contrast and Brightness Controls. Picture Is Fuzzy & Has Press to auto adjust. -
Page 57: Specification
Vertical scan Size(Maximum) 268.11 mm Optimal preset resolution 1920 x 1080 (60 Hz) Plug & Play VESA DDC2B/CI Resolution Input Connector (E2276VW6) VGA / DVI Input Connector (E2276VWM6) VGA / HDMI(MHL) Input Video Signal Analog: 0.7Vp-p(standard), 75 OHM, TMDS Power Source 100-240V~,50/60Hz, 1.5A... -
Page 58: General Specification (23.6'')
General Specification (23.6'') Model name E2476VW6/E2476VWM6 Driving system TFT Color LCD Viewable Image Size 59.8 cm diagonal Pixel pitch 0. 2715 mm(H) x 0. 2715 mm(V) Panel Video (E2476VW6) R, G, B Analog lnterface & Digital Interface Video (E2476VWM6) R, G, B Analog lnterface & HDMI(MHL) interface Separate Sync. -
Page 59: Preset Display Modes
Preset Display Modes STANDARD RESOLUTION HORIZONTAL FREQUENCY(kHZ) VERTICAL FREQUENCY(Hz) 640×480 @60Hz 31.469 59.94 640×480 @72Hz 37.861 72.809 640×480 @75Hz 37.5 MAC MODE VGA 640 × 480@67Hz 66.667 IBM-MODE DOS 720×400@70Hz 31.469 70.087 800×600 @56Hz 35.156 56.25 800×600 @60Hz 37.879 60.317 SVGA 800×600 @72Hz 48.077... -
Page 60: Pin Assignments
Pin Assignments 15-Pin Color Display Signal Cable Pin Number Signal Name Pin Number Signal Name Pin Number Signal Name Video-Red GND-R N.C. Video-Green GND-G DDC-Serial data Video-Blue GND-B H-sync N.C. V-sync Detect Cable Ground DDC-Serial clock 24-Pin Color Display Signal Cable Pin No. -
Page 61: Plug And Play
19-Pin Color Display Signal Cable Pin No. Pin No. Signal Name Signal Name Pin No. Signal Name TMDS Data 2+ TMDS Data 0- DDC/CEC Ground TMDS Data 2 Shield TMDS Clock + +5V Power TMDS Data 2- TMDS Clock Shield Hot Plug Detect TMDS Data 1+ TMDS Clock -... -
Page 62: Regulation
Regulation FCC Notice FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. -
Page 63: Weee Declaration
WEEE Declaration Disposal of Waste Equipment by Users in Private Household in the European Union. This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste.Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. -
Page 64: Epa Energy Star
EPA Energy Star ENERGY STAR® is a U.S. registered mark. As an ENERGY STAR® Partner, AOC International (Europe) BV and Envision Peripherals, Inc. have determined that this product meets the ENERGY STAR® guidelines for energy efficiency. -
Page 65: Tco Document
TCO DOCUMENT... -
Page 66: Service
AOC Certified or Authorized Service Center under the following condition: • Make sure the LCD Monitor is packed in a proper carton box (AOC prefers the original carton box to protects your monitor well enough during transport). •... - Page 67 If your warranty has expired, you still have access to all available service options, but you will be responsible for the cost of service, including parts, labor, shipping (if any) and applicable taxes. AOC Certified or Authorized Service Center will provide you with an estimate of service costs before receiving your authorization to perform service.
-
Page 68: Warranty Statement For Middle East And Africa (Mea)
For AOC LCD Monitors sold within the Middle East and Africa (MEA) and the Commonwealth of Independent States (CIS), AOC International (Europe) B.V. warrants this product to be free from defects in material and workmanship for a period of One (1) to Three (3) years from the manufacture date depending on sale country. During this period, AOC International (Europe) B.V. - Page 69 If your warranty has expired, you still have access to all available service options, but you will be responsible for the cost of service, including parts, labor, shipping (if any) and applicable taxes. AOC Certified, Authorized Service Centeror dealerwill provide you with an estimate of service costs before receiving your authorization to perform service.
-
Page 70: Aoc Pixel Policy Iso 9241-307 Class 1
No manufacturer can guarantee that all panels will be free from pixel defects, but AOC guarantees that any monitor with an unacceptable number of defects will be repaired or replaced under warranty. This Pixel Policy explains the different types of pixel defects and defines acceptable defect levels for each type. -
Page 71: Warranty Statement For North & South America (Excluding Brazil)
In the United States and Canada contact your Dealer or EPI Customer Service, RMA Department at the toll free number (888) 662-9888. Or you can request an RMA Number online at www.aoc.com/na-warranty. * This limited warranty does not cover any losses or damages that occur as a result of: •... - Page 72 ARGENTINA: http://ar.aoc.com/support/warranty BOLIVIA: http://bo.aoc.com/support/warranty CHILE: http://cl.aoc.com/support/warranty COLOMBIA: http://co.aoc.com/warranty COSTA RICA: http://cr.aoc.com/support/warranty DOMINICAN REPUBLIC: http://do.aoc.com/support/warranty ECUADOR: http://ec.aoc.com/support/warranty EL SALVADOR: http://sv.aoc.com/support/warranty GUATEMALA: http://gt.aoc.com/support/warranty HONDURAS: http://hn.aoc.com/support/warranty NICARAGUA: http://ni.aoc.com/support/warranty PANAMA: http://pa.aoc.com/support/warranty PARAGUAY: http://py.aoc.com/support/warranty PERU: http://pe.aoc.com/support/warranty URUGUAY: http://pe.aoc.com/warranty VENEZUELA: http://ve.aoc.com/support/warranty IF COUNTRY NOT LISTED: http://latin.aoc.com/warranty...
-
Page 73: Ease Programe
*AOC will need to obtain a credit card number if you would like to get a new AOC monitor advanced shipped to your location, prior to the defective unit arriving at AOC’s service center. If you do not wish to supply a credit card, AOC will only ship the new monitor, once the defective unit arrives at the AOC service center.