Installation Overview
Before you start installation, we encourage you to read these instructions
carefully in order to get the full benefit from your PiranhaMAX.
There are three basic installation tasks that you must perform for the
PiranhaMAX:
• install the control head
• install the transducer
• test the complete installation and lock the transducer position.
If you purchased a PiranhaMAX Portable unit, proceed to PiranhaMAX
Portable Case Assembly for installation instructions. If you are planning a
fixed installation, proceed to Fixed Control Head Installation.
Supplies: In addition to the hardware supplied with your transducer, you will
need a powered hand drill and various drill bits, various hand tools, including
a ruler or straightedge, a level, a 12" plumb line (weighted string or
monofilament line), marker or pencil, safety glasses and dust mask, and
marine-grade silicone sealant.
1
Installation Overview