Table of Contents
Advertisement
26. ISM Method (Command2:p)
G To avoid having a fixed image remain on screen.
Transmission
[[j ][p][ ][Set ID][ ][Data][Cr]
I
Data 0: Normal
2: Orbiter
1: White wash
3: Inversion
Acknowledgement
[[p][ ][Set ID][ ][OK][Data][x]
I
27. Low Power (Command2:q)
G To control the low power function on/off.
Transmission
[[j ][q][ ][Set ID][ ][Data][Cr]
I
Data 0: Low power off
1: Low power on
Acknowledgement
[[q][ ][Set ID][ ][OK][Data][x]
I
28. Orbiter
Time Setting
(Command2:r)
G To adjust orbiter operation time term.
Transmission
[[j ][r][ ][Set ID][ ][Data][Cr]
I
Data
Min: 1 ~ Max: FE
Acknowledgement
[[r][ ][Set ID][ ][OK][Data][x]
I
29. Orbiter
Pixel
Setting
(Command2:s)
G To adjust pixel number in orbiter function.
Transmission
[[j ][s][ ][Set ID][ ][Data][Cr]
I
Data
Min: 1~Max:9
Acknowledgement
[[s][ ][Set ID][ ][OK][Data][x]
I
30. Picture
Size Setting
for Double
Window
mode
(Command2:t)
G To adjust main window size in Double Window mode.
Transmission
[[j ][t][ ][Set ID][ ][Data][Cr]
I
Data
Min:0~Max:1E(or20)
• Refer to 'Real data mapping1 '. See page 38.
Acknowledgement
[[t][ ][Set ID][ ][OK][Data][x]
I
External Control Device Setup
31. Auto Configure
(Command2:u)
G To adjust picture position and minimize image shaking
automatically.
It works only in RGB (PC) mode.
Transmission
[[j ][u][ ][Set ID][ ][Data][Cr]
J
Data l:Toset
Acknowledgement
[[u][ ][Set ID][ ][OK][Data][x]
J
32. Tune command (Command:
m a)
G Tune channel to following physical number
Transmission
[[m][a][
][Set ID][ ][Data0][
][Data1][
][Data2][
][Data3][Cr]
J
Data 0: Air: 02 ~ 45, Cable:01,0E~7D
1:0
2:0
3: High -_ Main Channel: 0, Sub Channel: 1
Low -_ Air: 0, CATV: 1
Acknowledgement
[[a][ ][Set IU][ ][OK][Data0][
][Data1][
][Data2][
][Data3][x]
J
33. Channel
Add/Del
(Command:
m b)
G To add and delete the channels
Transmission
I[m][b][
][Set ID][ ][Data][Cr]
J
Data 0: Channel Memory
1: Channel Erase
Acknowledgement
I[b][ ][Set IU][ ][OK][Uata][x]
J
34. Key (Command:
m c)
G To send IR remote key code
Transmission
I[m][c][
][Set ID][ ][Data][
][Cr]
Data Key code: Refer to page 43.
Acknowledgement
[[c][ ][Set IU][ ][OK][Data][x]
Owner's Manual
41
Advertisement
Table of Contents
