Test Tone; Monitor Setup; Monitor Tilt - Blaupunkt Chicago IVDM-7002 Operating Instructions Manual

Setup Menu

Test tone

You can send a test tone here to the connected loudspeakers in
order to check that they are operating properly.
Test Tone Test Tone
AUDIO AUDIO
FRONT L
PREV PREV
REAR L
:SET
ENTER
You are in the AUDIO setup menu.
1. Use the / keys to select the Test Tone sub-menu,
and press the ENTER key.
The "FRONT L" (front left) option is highlighted.
2. Use the / keys to select the desired loudspeaker,
and press the ENTER key.
A test tone will now be output for about 3 seconds through
the chosen loudspeaker.
3. Repeat these steps for the other loudspeakers.
FRONT R
CENTER
REAR R
SUB WOOFER
: MENUE CHANGE RETURN :END
SRC :BACK SETUP

Monitor setup

1. Press the SETUP key, and then choose the SCREEN set-
up menu by repeatedly pressing the SRC key.
The SCREEN setup menu appears.
Tilt Tilt
SCREEN
SCREEN
TILT TILT
POSITION POSITION
OPEN/CLOSE OPEN/CLOSE
ENTER :SET SRC

Monitor tilt

Here you can adjust the tilt that you want as well as the distance
of the monitor and whether the monitor should be retracted (au-
tomatic) or not (manual) when the ignition is turned off.
You are in the SCREEN setup menu.
1. Use the / keys to select the Tilt sub-menu, and
press the ENTER key.
The "TILT" option is highlighted.
2. Use the / keys to select the "TILT" (monitor tilt),
"POSITION" or "OPEN/CLOSE" option that you want and
then press the ENTER key.
-2 -2 -1 -1 0 +1 +1 +1 +1 +2 +2 +2 +2
BACKWARD BACKWARD BACKWARD BACKWARD FORWARD FORWARD
Automatic Automatic Manual Manual
: MENUE CHANGE RETURN :BACK SETUP :END
55