Functional Description; Operation - Makita UB1102 Instruction Manual

FUNCTIONAL DESCRIPTION

CAUTION:
Always be sure that the tool is switched off and
•
unplugged before adjusting or checking function
on the tool.
Switch action
CAUTION:
Before plugging in the tool, always check to see
•
that the switch trigger actuates properly and
returns to the "OFF" position when released.
For UB1102
1
014263
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
For continuous operation, pull the switch trigger, push in
the lock button and then release the switch trigger.
Switch can be locked in "ON" position for ease of
operator comfort during extended use. Apply caution
when locking tool in "ON" position and maintain firm
grasp on tool.
To stop the tool from the locked position, pull the switch
trigger fully, then release it.
For UB1103
2
3
4
014256
To start the tool, simply pull the switch trigger. Tool
speed is increased by increasing pressure on the switch
trigger. Release the switch trigger to stop. Switch can be
locked in "ON" position for ease of operator comfort
during extended use. Apply caution when locking tool in
"ON" position and maintain firm grasp on tool.
For continuous operation, pull the switch trigger, push in
the lock button and then release the switch trigger.
1. Switch trigger
2
2. Lock button
1. Switch trigger
1
2. Speed control
5
screw
3. Higher
4. Lower
5. Lock button
To stop the tool from the locked position, pull the switch
trigger fully, then release it.
A speed control screw is provided so that maximum tool
speed can be limited (variable). Turn the speed control
screw clockwise for higher speed, and counterclockwise
for lower speed.

OPERATION

014419
CAUTION:
Always hold the tool only by the handle when
•
performing an operation. Do not touch the metal
part.
Do not use the tool for blowing air into objects, like
•
rubber rafting, balls or other inflatable products.
Increased motor revolution may cause dangerous
fan breakage.
Blowing
3
1
014257
For dust blowing, attach nozzle to blower outlet. Turn it
clockwise until it clicks.
Dust suction (optional accessory)
2
1
4
014258
For dust suction, fit nozzle onto suction inlet and dust
bag onto blower outlet. Turn them clockwise until it clicks.
4
1. Nozzle
2. Blower outlet
3. Pin
2
1. Dust bag
2. Blower outlet
3. Nozzle
4. Suction inlet
3