External Control Device Setup - LG DU-50PY10 Owner's Manual

External Control Device Setup

19. Color Temperature (Command2:u)
G To adjust color temperature.
You can also adjust color temperature in the Video
menu.
Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data 0: Cool 1: Medium 2: Warm
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
20. PIP Input Select (Command2:y)
G To select input source for sub picture in PIP/Twin pic-
ture mode.
Transmission
[k][y][ ][Set ID][ ][Data][Cr]
Data 0: Antenna
1: Cable
2: Video
3: Front Video
Acknowledgement
[y][ ][Set ID][ ][OK][Data][x]
21. ISM Method (Command2:p)
G To avoid having a fixed image remain on screen.
Transmission
[ j ][p][ ][Set ID][ ][Data][Cr]
Data 0: Normal
1: Orbiter
2: Inversion
Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
22. White Wash (Command2:q)
G To control the white wash function on/off.
You can also adjust white wash in Option menu.
Transmission
[ j ][q][ ][Set ID][ ][Data][Cr]
Data 0: White Wash off
1: White Wash on
Acknowledgement
[q][ ][Set ID][ ][OK][Data][x]
23. Orbiter Time Setting (Command2:r)
G To adjust orbiter operation time term.
Transmission
[ j ][r][ ][Set ID][ ][Data][Cr]
Data Min: 1 ~ Max: FE
Acknowledgement
[r][ ][Set ID][ ][OK][Data][x]
84 Plasma TV
24. Orbiter Pixel Setting (Command2:s)
G To adjust pixel number in orbiter function.
Transmission
[ j ][s][ ][Set ID][ ][Data][Cr]
Data Min: 1 ~ Max: A
Acknowledgement
[s][ ][Set ID][ ][OK][Data][x]
25. Tune Command (Command: m a)
G To tune channel to following physical/major/minor number
Transmission
[m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][ ][Data3][ ][Data4][ ][Data5][Cr]
Data 0: Physical channel number Min: 1~ Max: 0x87
Data 1, Data 2: Major Channel Number (two part)/ Channel
Number (One part) (Data 1: High, Data 2: Low)
Data 3, Data 4: Minor Channel Number (Data3: High, Data4: Low)
Data 5:
Two/One 5
7 6
Main/Sub
Part Reserved
Picture
Channel
0 Main 0 x
Two
1 1
Sub x
One
x
x
x
x
x
x
x
x
*All data are transmitted by Hexadecimal code
Example) If you want PIP channel tuned to ATSC air (standard)
30-5, the command sequence is ma 00 1e 00 1e 00 05 82.
Acknowledgement
[a][ ][Set ID][ ][OK][Data0][Data1][Data2][Data3][Data4][x]
[a][ ][Set ID][ ][NG][Data0][x]
26. Channel Add/Del (Command: m b)
G To add and delete the channels
Transmission
[m][b][ ][Set ID][ ][Data][Cr]
Data 0: Channel Delete
1: Channel Add
Acknowledgement
[b][ ][Set ID][ ][OK][Data][x]
[b][ ][Set ID][ ][NG][Data][x]
27. Key (Command: m c)
G To send IR remote key code
Transmission
[m][c][ ][Set ID][ ][Data][ ][Cr]
Data Key code: Refer to page 86.
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
* It's impossible to command the IR Code 0x08 and 0xC4
with RS-232C.
4 Step
2 1
3 0
Reserved
x 0 0 0 0
NTSC Air
x
0 0 0 1
NTSC Cable
x 0 0 1 0
ATSC Air
ATSC
x 0 0 1 1
Cable_std
ATSC
x 0 1 0 0
Cable_hrc
ATSC
x 0 1 0 1
Cable_irc
x 1
0 1
0 ATSC cable
x 0 1 1 1 Reserved
x
...
x
1 1 1 1 Reserved