External A/V Source Setup; Monitor Out Setup / Dvd Setup - LG DU-50PX10/10C Owner's Manual

Installation
External A/V Source Setup
External A/V Source Setup
How to connect
Connect the audio and video cables from the external equip-
ment's output jacks to the TV input jacks, as shown in the
figure.
When connecting the TV to external equipment, match the
jack colors (Video = yellow, Audio Left = white, and Audio
Right = red).
How to use
1. Select the input source with using the TV/VIDEO button on
the remote control. (If connected to A/V INPUT 1, select
Video 1 input source).
2. Operate the corresponding external equipment. Refer to
external equipment operating guide.
Monitor Out Setup
Monitor Out Setup
MONITOR
COMPONENT 2 DVD
. OUTPUT
DTV
A/V
INPUT
COMPONENT 1
INPUT 1
RGB INPUT R L R AUDIO
(PC/DTV INPUT)
VIDEO INPUT
AUDIO INPUT
S-VIDEO
IN
(R) AUDIO (L)
DVD Setup
DVD Setup
How to connect
1. Connect the DVD video outputs (Y, P
P , P ) INPUT jacks on the TV and connect the DVD audio outputs
B R
to the AUDIO INPUT jacks on the TV, as shown in the figure.
2. If your DVD only has an S-Video output jack, connect this to the S-
VIDEO input on the TV and connect the DVD audio outputs to the
AUDIO INPUT jacks on the TV, as shown in the figure.
NOTE: If your DVD player does not have component video output, use
S-Video.
How to use
1. Turn on the DVD player, insert a DVD.
2. Use the TV/VIDEO or COMP/RGB/DVI button on the remote control
to select Component 1 or Component 2. (If connected to S-
VIDEO, select the Video 1 or Video 2 external input source.)
3. Refer to the DVD player's manual for operating instructions.
• Component Input ports
To get better picture quality, connect a DVD player to the compo-
nent input ports as shown below.
Component ports
on the TV
Video output ports
on DVD player
14 Plasma TV
B INPUT
DTV INPUT)
The TV has a special signal output capability which allows you to
hook up a second TV or monitor.
Connect the second TV or monitor to the TV's MONITOR OUTPUT.
See the Operating Manual of the second TV or monitor for further
Antenna 1
Antenna 2
(MONO)
details regarding that device's input settings.
Analog/DTV DTV
L VIDEO
S-VIDEO
AC INPUT
NOTE
• Component, RGB-PC/RGB-DTV, DVI-PC/DVI-DTV, DTV input
sources cannot be used for Monitor out.
VIDEO
, P ) to the COMPONENT (Y,
B R
Y P P
R
B
NOTES
• Digital Audio will not work for Component 2 input source.
• Digital Audio operation has priority if Digital Audio and AUDIO L/R
Y Pb Pr
R-Y
Y B-Y are connected at the same time.
Cr
Y Cb
P
Y P
R
B
MONITOR
COMPONENT 2
DVD
. OUTPUT
DTV
A/V
COMPONENT 1
INPUT
INPUT 1
(MONO)
R L AUDIO S-VIDEO
R L VIDEO
VIDEO INPUT
AUDIO INPUT
R AUDIO L VIDEO
DIGITAL AUDIO
(OPTICAL)
COMPONENT 2
COMPONENT 1
R L
RS-232C INPUT REMOTE DVI COMPONENT1
INPUT OUTPUT
(CONTROL/SERVICE) CONTROL INPUT
AUDIO INPUT VIDEO INPUT
or
DIGITAL AUDIO
(R) AUDIO (L)
OPTICAL
Antenna 1 Antenna 2
Analog/DTV DTV
AC INPUT
Camcorder
Video Game Set
MONITOR
DVD
. OUTPUT
DTV
A/V
INPUT
INPUT 1 Antenna 1 Ante
(MONO)
Analog/DTV D
R AUDIO L VIDEO S-VIDEO
or
B S-VIDEO (R) AUDIO (L)
R
DVD