Installation - LG DU-50PX10/10C Owner's Manual

Installation

Installation
Installation
Ensure that the following accessories are included with your plasma display. If an accessory is missing, please contact the dealer
where you purchased the product.
Owner's Manual
MODE
COMP/RGB/DVI
FLASHBK
MUTE SURF
VOL CH
SAP RATIO
INFO CC
OK
MENU EXIT
SOUND VIDEO
PLAY PAUSE STOP RECORD
REW FF SKIP
PIP PIPCH- PIPCH+ PIPINPUT
FREEZE ZOOM SIGNAL SWAP
ADJUST
Remote Control
Attaching the TV assembly to the wall
Attaching the TV assembly to the wall
- Secure the TV assembly by attaching it to a wall for additional support.
10 Plasma TV
1.5V
Batteries
Power Cord
2-TV brackets
2-Wall brackets
• Install the TV brackets on the TV as shown.
Insert the 2 bolts and tighten securely, in the holes on the bracket. (42")
After removing the existing bolts, Insert the 4 bolts and tighten securely,
in the holes on the bracket.(50")
Install the wall brackets on the wall with 4 bolts*,
(not supplied with the product), as shown.
Match the height of the TV brackets and the wall brackets.
Check to be sure the brackets are tightened securely.
• Secure the TV assembly to the wall with strong strings or
wound wire cables, (not supplied with the product), as
shown.
75Ω Round Cable
2-TV bracket bolts(42")
4-TV bracket bolts(50")