Mapping Key Settings - Mitel 6800i Series Administrator's Manual

Operational, Basic, and Advanced Parameters

Mapping Key Settings

This section provides the hard key settings you can use to enable and disable the Redial, Conf, and Xfer keys on the IP
phone.
Parameter –
redial disabled
Description
Format
Default Value
Range
Example
Parameter –
conference disabled
Description
Format
Default Value
Range
Example
Parameter –
call transfer disabled
Description
Format
Default Value
Range
Example
A-170
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Enables or disables the Redial key on the IP phone. If this parameter is set to 0, the key is
active and can be pressed by the user. If this parameter is set to 1, pressing the Redial key
is ignored, and the dialed number is not saved to the "Redial List".
Boolean
0 (false)
0 (false), 1 (true)
redial disabled: 1
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Enables or disables the Conf key on the IP phone. If this parameter is set to 0, the key is
active and can be pressed by the user. If this parameter is set to 1, pressing the Conf key is
ignored.
Boolean
0 (false)
0 (false), 1 (true)
conference disabled: 1
Configuration Files
aastra.cfg, <model>.cfg, <mac>.cfg
Enables or disables the Xfer key on the IP phone. If this parameter is set to 0, the key is
active and can be pressed by the user. If this parameter is set to 1, pressing the Xfer key is
ignored.
Boolean
0 (false)
0 (false), 1 (true)
call transfer disabled: 1
41-001561-00 REV00 – 10.2014