Choosing Multiboot Preferences; Setting A New Boot Order In Computer Setup - HP Elite x2 1011 G1 User Manual

Choosing MultiBoot preferences

You can use MultiBoot in the following ways:
To set a new boot order that the computer uses each time it is turned on, by changing the boot
●
order in Computer Setup.
To dynamically choose the boot device, by pressing
●
"Hold the Volume Down button to enter the BIOS Startup Menu" message is displayed at the
bottom of the screen, and then pressing or tapping
To use MultiBoot Express to set variable boot orders. This feature prompts you for a boot device
●
each time the computer is turned on or restarted.

Setting a new boot order in Computer Setup

To start Computer Setup and set a boot device order that the computer uses each time it is turned on
or restarted, follow these steps:
1. Turn on or restart the computer, and then press
"Hold the Volume Down button to enter the BIOS Startup Menu" message is displayed at the
bottom of the screen.
2. Press or tap
3. Select one of the following options, and then follow the on-screen instructions:
Advanced > Boot Options > UEFI Boot Order > UEFI Hybrid
●
Advanced > Boot Options > UEFI Boot Order > UEFI Native Boot mode
●
Advanced > Boot Options > Legacy Boot Order > Legacy Boot Mode
●
Press enter.
4. To move the device up in the boot order, use a pointing device or touch screen to click the up
arrow, or press the
– or –
To move the device down in the boot order, use a pointing device or touch screen to click the
down arrow, or press the
5. To save your changes and exit Computer Setup, click the Save icon in the lower-left corner of
the screen, and then follow the on-screen instructions.
– or –
Select Main > Save Changes and Exit, and then follow the on-screen instructions.
f10 to enter Computer Setup.
+ key.
- key.
esc or the volume down button while the
f9 to enter the Boot Device Options menu.
esc or hold down the volume button while the
Using MultiBoot 79