Getting Started; Pet Unit Power Supply; Owner Unit Battery Installation - Motorola SCOUT600 User Manual

2. Getting Started

2.1

Pet Unit Power Supply

1. Connect the small plug of the power adapter to the pet unit (camera) and
the other end to the electrical outlet.
NOTE
Only use the enclosed power adapter (6V DC / 500mA) with the slightly larger
DC plug.
2. Slide the ON/OFF switch to the ON position. The power LED will light up
in orange.
3. Slide the ON/OFF switch to the OFF position to turn the Pet Unit off.
2.2

Owner Unit Battery Installation

Install the provided battery pack into the owner unit battery compartment.
Charge the battery in owner unit before first time use or when the owner unit
indicates the battery is low.
Black
1. Insert the plug of the rechargeable battery pack into the small socket inside
the battery compartment as shown above and fit the battery pack into the
compartment.
8
Red
Getting Started