Table of Contents
Advertisement
2.4
Registration (Pairing)
The Pet monitor camera is pre-registered to your Owner Unit. You do not need
to register it again unless the Pet Unit loses its link with the Owner Unit.
To re-register your Pet Unit, or register a new Pet Unit, follow the procedure
below:
1. Press the
to select the ADD CAMERA icon
1
2
3
4
2.
/
/
/
will pop up, press the
the desired Camera identification number and press the
searching for a camera unit. The Green Audio Level LED turns on while
searching.
3. Press and hold the PAIR button under the bottom left edge of the camera
unit until the owner unit finds the camera, beeps and the video from the
camera appears.
NOTE
If a particular Pet Unit was registered previously, registering this current Pet Unit
again will overwrite the old registration.
If no camera unit is found within about 30 seconds, the search will end and the
owner unit will return to its previous mode.
Getting Started
button of the owner unit and then press the
, and press the
+
-
UP button or
-
DOWN button
button to confirm.
DOWN button to select
button to start
11
Advertisement
Table of Contents
