Help - Motorola SCOUT600 User Manual

Digital video pet monitor
Table of Contents

Advertisement

7. Help

Display
No display
• Try recharging or replacing the battery pack.
• Reset the units. Disconnect the battery pack of the owner unit and unplug
both the units electrical power, then plug them back in.
• Is the unit turned on?
Press and hold the ON/OFF button
• Is the correct camera selected?
Change the camera number, if necessary.
• Is the video display turned on?
Press the VIDEO ON/OFF button
• When operating using batteries only, the Display will go blank after
4 minutes to save power. The unit is still active and will give you audio alerts.
You can reactivate the screen by pressing any button.
Registration
If the Pet Unit has lost its link with the Owner Unit
• Try recharging or replacing the battery pack.
• If the Pet Unit is too far away it may be going out of range, so move the Pet
Unit closer to the Owner Unit.
• Reset the units by disconnecting them from the battery and electrical power.
Wait about 15 seconds before reconnecting. Allow up to one minute for the
Pet Unit and the Owner Unit to synchronise.
• See 2.4 Registration (Pairing), if there is a need to re-register the units.
18
P
on the owner unit to turn it ON.
V
to turn it on.
Help

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scout600/2Scout600/4Scout600/3

Table of Contents