Ford ECOSPORT Owner's Manual page 160

Alternatively, press the left arrow button
to display the available frequency bands.
Scroll to the required frequency band and
press OK.
Station Tuning Control
Seek Tuning
Select a frequency band and briefly press
one of the seek buttons. The unit will stop
at the first station it finds in the direction
you have chosen.
Manual Tuning
1. Press function button 2.
2. Use the left and right arrow buttons to
tune down or up the frequency band in
small increments or press and hold to
increment quickly, until you find a
station you want to listen to.
3. Press OK to continue listening to a
station.
Scan Tuning
Scan allows you to listen to a few seconds
of each station detected.
1. To activate, press the function button
3.
2. Use the seek buttons to scan up or
down the frequency band.
3. To deactivate, press the function
button 3 again or OK to continue
listening to a station.
Station Preset Buttons
This feature allows you to store your
favorite stations, they can be recalled by
selecting the appropriate frequency band
and pressing one of the preset buttons.
1. Select a frequency band.
2. Tune to the station required.
Ecosport (CBW) India
Audio System
3. Press and hold one of the preset
buttons. A progress bar and message
will appear. When the progress bar
completes the station has been stored.
The audio unit will also mute
momentarily as confirmation.
You can repeat this on each frequency
band and for each preset button.
Note: When you drive to another part of the
country, stations that broadcast on
alternative frequencies, and are stored on
preset buttons, may be updated with the
correct frequency and station name for that
area.
Autostore Control
Note: Stores the 10 strongest signals
available in the frequency band AM AST or
FM AST, and overwrites the previously
stored stations. You can also manual store
a station in the same manner as other
frequency bands.
• Press and hold the function button 1. A
progress bar and a message will be
displayed.
• When the search is complete, sound is
restored and the strongest signals are
stored on the autostore presets.
Traffic Information Control
Equipped)
To receive alerts about traffic, you must
press the TA button. A TA symbol is
displayed to show that the feature was
activated.
Turning Traffic Announcements On and
Off
Before you can receive traffic
announcements, you must press either the
TA button. A TA display will appear to
show the feature is switched on.
157
(If