Appendix; Troubleshooting - LG 26LH1DC3 Installation And Operating Manual

APPENDIX

TROUBLESHOOTING

Some quick and easy tips to resolving problems
Software Problems
TV not functions properly.
Software lockup.
Software Corrupted.
2-5-5 + MENU performed
more than once.
Virtual and Physical channels appear in channel scan w/Channel Up/Down.
2-5-5 + MENU not per-
formed.
Can not direct enter channel number
Channel not included
in channel scan in TV
controller.
Power
No Power.
Display Panel Picture
No picture
Display panel is turned off.
Antenna/Cable not
connected.
Connections incorrect.
M.P.I. not connected.
Encrypted program.
Wrong tuning band.
Remove power cord for 5 minuts.
8
Start all over with item 1 17 , set to 001, press Enter then redo Auto Program, Channel List, Clock, etc.
8
*Note: 2-5-4 + MENU can be done more than once.
After Auto Program and Channel List, etc. press 2-5-5 + MENU to transfer channels and TV setup to
8
internal TV controller. Afterward, only Physical or only Virtual channels will appear in digital channel scan,
analog channel scan will be normal.
*Note: Be sure to set item 028 Ch Overide to 000.
After 2-5-5 + MENU, only channels included in TV controller will appear.
8
If channel is available, redo channel scan. If it is not available it will not appear on the TV screen.
See troubleshooting flow chart.
8
Turn TV on.
8
Power failure?
8
Connect Antenna/Cable signal source to 26LH1DC3/4/5.
8
Check connections on 26LH1DC3/4/5.
8
If applicable, connect M.P.I. cable to M.P.I. device.
8
Try another channel.
8
Adjust Installer menu settings.
8
69